Today's Message Index:
----------------------
1. 05:00 AM - Re: lights (Steve Newcomer)
2. 05:58 AM - RV7 QB tanks (David Figgins)
3. 05:30 PM - Re: lights (sjevans)
4. 07:39 PM - Re: lights (sportpilot)
5. 09:48 PM - Re: lights (Kathleen@rv7.us)
Message 1
| INDEX | Back to Main INDEX |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
--> RV7-List message posted by: "Steve Newcomer" <snewco@comcast.net>
So far I have installed three sets in customers RVs and they have no
complaints. The light they project is better then the wing mounted from the
kit manufacturer. I am about to install the LED setup next and looking
forward to it.
----- Original Message -----
From: "Rick" <richardglick@charter.net>
Subject: Re: RV7-List: lights
> --> RV7-List message posted by: "Rick" <richardglick@charter.net>
>
> Nelson,
>
> I ordered the two kits and they are due to show up at my door today. I
> will let you know how look. The owner (Bill Vondane has been busy in his
> other profession (Like all of us) and it took a couple emails to get it
> shipped, but he seems like a very nice and accommodating person. I am
> looking forward to receiving and installing the kits.
>
> Richard Glick
> ----- Original Message -----
> From: <nltiiii@bellsouth.net>
> To: <RV7-list@matronics.com>
> Subject: RV7-List: lights
>
>
> > --> RV7-List message posted by: <nltiiii@bellsouth.net>
> >
> > Does anyone have any comments (pro or con) on the CreativAir
> > position/landing lights?
> >
> > Nelson Tower
> > RV7 wings
> > fuse on order
> >
> >
> >
>
>
Message 2
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
<rv7-list@matronics.com>
--> RV7-List message posted by: "David Figgins" <2004nospam@earthlink.net>
I think I may have run into a problem and need some advice, I have the wing
kit on order with the QB tanks (due in December), and in reading the
drawings and instruction this past couple of days I noticed a tank mod is
required for inverted flight that adds a flop tube in the standard vent line
area and moves the sender outboard one station. I am assuming the QB tanks
are in the standard configuration. Questions therefore are 1) can the tank
be modified for this mod after it is complete (i.e. can you get access and
keep inside clean) and 2) is this mod for sustained inverted flight and
regular rolls, loops etc are OK with the standard tanks.
Thanks for any input
Dave RV7A
Message 3
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
--> RV7-List message posted by: "sjevans" <sjevans@cox.net>
Steve,
Whose Landing lights are you referring to? I need to settle on a
landing / position light setup (without cutting into the wing leading
edge).
I'm interested in how the LED's perform.
Thanks for any info.
Sam
(7A builder)
-----Original Message-----
From: owner-rv7-list-server@matronics.com
[mailto:owner-rv7-list-server@matronics.com] On Behalf Of Steve Newcomer
Subject: Re: RV7-List: lights
--> RV7-List message posted by: "Steve Newcomer" <snewco@comcast.net>
So far I have installed three sets in customers RVs and they have no
complaints. The light they project is better then the wing mounted from
the
kit manufacturer. I am about to install the LED setup next and looking
forward to it.
----- Original Message -----
From: "Rick" <richardglick@charter.net>
Subject: Re: RV7-List: lights
> --> RV7-List message posted by: "Rick" <richardglick@charter.net>
>
> Nelson,
>
> I ordered the two kits and they are due to show up at my door today.
I
> will let you know how look. The owner (Bill Vondane has been busy in
his
> other profession (Like all of us) and it took a couple emails to get
it
> shipped, but he seems like a very nice and accommodating person. I am
> looking forward to receiving and installing the kits.
>
> Richard Glick
> ----- Original Message -----
> From: <nltiiii@bellsouth.net>
> To: <RV7-list@matronics.com>
> Subject: RV7-List: lights
>
>
> > --> RV7-List message posted by: <nltiiii@bellsouth.net>
> >
> > Does anyone have any comments (pro or con) on the CreativAir
> > position/landing lights?
> >
> > Nelson Tower
> > RV7 wings
> > fuse on order
> >
> >
> >
>
>
==
==
==
==
Message 4
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
--> RV7-List message posted by: "sportpilot" <sportypilot@stx.rr.com>
I have been researching this for a while, the best bet is Bill
Vondane (might be misspelled) at www.creativeair.com, hands down because I
refuse to cut into the leading edge when it looks so good..
Danny..
----- Original Message -----
From: "sjevans" <sjevans@cox.net>
Subject: RE: RV7-List: lights
> --> RV7-List message posted by: "sjevans" <sjevans@cox.net>
>
> Steve,
> Whose Landing lights are you referring to? I need to settle on a
> landing / position light setup (without cutting into the wing leading
> edge).
> I'm interested in how the LED's perform.
> Thanks for any info.
> Sam
> (7A builder)
>
> -----Original Message-----
> From: owner-rv7-list-server@matronics.com
> [mailto:owner-rv7-list-server@matronics.com] On Behalf Of Steve Newcomer
> To: rv7-list@matronics.com
> Subject: Re: RV7-List: lights
>
> --> RV7-List message posted by: "Steve Newcomer" <snewco@comcast.net>
>
> So far I have installed three sets in customers RVs and they have no
> complaints. The light they project is better then the wing mounted from
> the
> kit manufacturer. I am about to install the LED setup next and looking
> forward to it.
>
>
> ----- Original Message -----
> From: "Rick" <richardglick@charter.net>
> To: <rv7-list@matronics.com>
> Subject: Re: RV7-List: lights
>
>
>> --> RV7-List message posted by: "Rick" <richardglick@charter.net>
>>
>> Nelson,
>>
>> I ordered the two kits and they are due to show up at my door today.
> I
>> will let you know how look. The owner (Bill Vondane has been busy in
> his
>> other profession (Like all of us) and it took a couple emails to get
> it
>> shipped, but he seems like a very nice and accommodating person. I am
>> looking forward to receiving and installing the kits.
>>
>> Richard Glick
>> ----- Original Message -----
>> From: <nltiiii@bellsouth.net>
>> To: <RV7-list@matronics.com>
>> Subject: RV7-List: lights
>>
>>
>> > --> RV7-List message posted by: <nltiiii@bellsouth.net>
>> >
>> > Does anyone have any comments (pro or con) on the CreativAir
>> > position/landing lights?
>> >
>> > Nelson Tower
>> > RV7 wings
>> > fuse on order
>> >
>> >
>> >
>>
>>
>
>
> ==
> ==
> ==
> ==
>
>
>
Message 5
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
--> RV7-List message posted by: Kathleen@rv7.us
I believe the correct website is www.creativair.com.
The positives of Bill's halogen landing lights are that they are reasonably
bright and very light weight. They do draw a fair amount of amperage and
make a lot of heat, but what bright lights don't? I have installed a pair
of them....
Kathleen Evans
www.rv7.us
-----Original Message-----
From: owner-rv7-list-server@matronics.com
[mailto:owner-rv7-list-server@matronics.com] On Behalf Of sportpilot
Subject: Re: RV7-List: lights
--> RV7-List message posted by: "sportpilot" <sportypilot@stx.rr.com>
I have been researching this for a while, the best bet is Bill
Vondane (might be misspelled) at www.creativeair.com, hands down because I
refuse to cut into the leading edge when it looks so good..
Danny..
----- Original Message -----
From: "sjevans" <sjevans@cox.net>
Subject: RE: RV7-List: lights
> --> RV7-List message posted by: "sjevans" <sjevans@cox.net>
>
> Steve,
> Whose Landing lights are you referring to? I need to settle on a
> landing / position light setup (without cutting into the wing leading
> edge).
> I'm interested in how the LED's perform.
> Thanks for any info.
> Sam
> (7A builder)
>
> -----Original Message-----
> From: owner-rv7-list-server@matronics.com
> [mailto:owner-rv7-list-server@matronics.com] On Behalf Of Steve Newcomer
> To: rv7-list@matronics.com
> Subject: Re: RV7-List: lights
>
> --> RV7-List message posted by: "Steve Newcomer" <snewco@comcast.net>
>
> So far I have installed three sets in customers RVs and they have no
> complaints. The light they project is better then the wing mounted from
> the
> kit manufacturer. I am about to install the LED setup next and looking
> forward to it.
>
>
> ----- Original Message -----
> From: "Rick" <richardglick@charter.net>
> To: <rv7-list@matronics.com>
> Subject: Re: RV7-List: lights
>
>
>> --> RV7-List message posted by: "Rick" <richardglick@charter.net>
>>
>> Nelson,
>>
>> I ordered the two kits and they are due to show up at my door today.
> I
>> will let you know how look. The owner (Bill Vondane has been busy in
> his
>> other profession (Like all of us) and it took a couple emails to get
> it
>> shipped, but he seems like a very nice and accommodating person. I am
>> looking forward to receiving and installing the kits.
>>
>> Richard Glick
>> ----- Original Message -----
>> From: <nltiiii@bellsouth.net>
>> To: <RV7-list@matronics.com>
>> Subject: RV7-List: lights
>>
>>
>> > --> RV7-List message posted by: <nltiiii@bellsouth.net>
>> >
>> > Does anyone have any comments (pro or con) on the CreativAir
>> > position/landing lights?
>> >
>> > Nelson Tower
>> > RV7 wings
>> > fuse on order
>> >
>> >
>> >
>>
>>
>
>
> ==
> ==
> ==
> ==
>
>
>
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|