---------------------------------------------------------- RV7-List Digest Archive --- Total Messages Posted Tue 11/16/04: 2 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 07:35 AM - Lead counter weights () 2. 03:16 PM - Re: Lead counter weights (Sargentclt@cs.com) ________________________________ Message 1 _____________________________________ Time: 07:35:45 AM PST US Subject: RV7-List: Lead counter weights From: --> RV7-List message posted by: I had a hell of a time shaping the elevator counterweights this past weekend, is there some easy trick to cut this stuff? How accurate does the shape have to be? I do not have a band saw. Dave (empennage almost done waiting for wings) Do not archive ________________________________ Message 2 _____________________________________ Time: 03:16:50 PM PST US From: Sargentclt@cs.com Subject: Re: RV7-List: Lead counter weights --> RV7-List message posted by: Sargentclt@cs.com I used a rasp and then a fine file to get it the way I wanted. Hope that helps. Tad Sargent Sargentclt(at)CS.com RV7A