---------------------------------------------------------- RV7-List Digest Archive --- Total Messages Posted Sun 12/19/04: 4 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 05:02 AM - Cut out for left shoulder (Trainnut01@AOL.com) 2. 02:34 PM - Fuel cap (John Brunke) 3. 03:40 PM - Re: Fuel cap (Dan Checkoway) 4. 03:50 PM - Re: Cut out for left shoulder (Dan Checkoway) ________________________________ Message 1 _____________________________________ Time: 05:02:57 AM PST US From: Trainnut01@AOL.com Subject: RV7-List: Cut out for left shoulder --> RV7-List message posted by: Trainnut01@aol.com Somewhere I saw a picture of a 7 (or 9) with an area cut out of the deck to give the pilot's left shoulder a little more room. Is anybody familiar with this? Carroll Jernigan RV7A (Bending brake lines) do not archive ________________________________ Message 2 _____________________________________ Time: 02:34:18 PM PST US From: "John Brunke" Subject: RV7-List: Fuel cap --> RV7-List message posted by: "John Brunke" Fellow RV'ers, Is it Ok to use DC-4 compound on the fuel cap "O" ring? If not, what do some of you use? Thanks in advance, John Brunke N215KC, RV-6 RV-7 tail in the basement. ________________________________ Message 3 _____________________________________ Time: 03:40:37 PM PST US From: "Dan Checkoway" Subject: Re: RV7-List: Fuel cap --> RV7-List message posted by: "Dan Checkoway" EZ-Turn (a.k.a. Fuelube) Spruce p/n 09-00306 )_( Dan RV-7 N714D http://www.rvproject.com ----- Original Message ----- From: "John Brunke" Subject: RV7-List: Fuel cap > --> RV7-List message posted by: "John Brunke" > > Fellow RV'ers, > > Is it Ok to use DC-4 compound on the fuel cap "O" ring? > > If not, what do some of you use? > > Thanks in advance, > John Brunke N215KC, RV-6 > > RV-7 tail in the basement. > > > > > > ________________________________ Message 4 _____________________________________ Time: 03:50:10 PM PST US From: "Dan Checkoway" Subject: Re: RV7-List: Cut out for left shoulder --> RV7-List message posted by: "Dan Checkoway" Yeah, John Hughes did that on his RV-6 with the slider canopy. The slider was kind of an important piece of the puzzle since the slider rails reinforced the area of the cutout. Here's a photo on this page: http://www.rvproject.com/20040314.html John's email is rv6flyer ---at--- verizon (dot) net. He did a few other really cool mods to make his RV-6 probably the most comfortable RV I've ever flown in. )_( Dan RV-7 N714D http://www.rvproject.com ----- Original Message ----- From: Subject: RV7-List: Cut out for left shoulder > --> RV7-List message posted by: Trainnut01@aol.com > > Somewhere I saw a picture of a 7 (or 9) with an area cut out of the deck to > give the pilot's left shoulder a little more room. Is anybody familiar with > this? > Carroll Jernigan > RV7A (Bending brake lines) > do not archive > >