Today's Message Index:
----------------------
1. 06:00 AM - Jam nuts (ed clegg)
2. 07:44 AM - Re: high oil and fuel pressure (Hopperdhh@AOL.com)
Message 1
| INDEX | Back to Main INDEX |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
--> RV7-List message posted by: "ed clegg" <edwclg@adelphia.net>
Anyone out there experience looseing jam nuts. I have heard of some problem.
Is there any reason not to use lock nuts on these.....
Thanks,
Ed Clegg
Message 2
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: high oil and fuel pressure |
--> RV7-List message posted by: Hopperdhh@aol.com
John,
There was a post a few days ago about grounding the Van's gauge mounting
"manifold." It is annodized which is a very tough insulator. Take a bolt out
and use knife or file to cut through the annodized layer, then run a ground
wire to a good ground.
Dan Hopper
Walton, IN
RV-7A
N766DH (Flying since last July)
In a message dated 1/28/05 12:45:18 A.M. US Eastern Standard Time,
jwbrunk@attglobal.net writes:
>
> Hmmm ....
>
> I would check the power, ground and sense wires to the gauges. During this
> time was the electrical system otherwise doing fine?
>
> Just a thought.
>
> James
James,
The electrical system was working perfectly.
Just the way the guages were moving back and forth
in relatation to each other, I'm going to take a closer look
at the grounding situation up at the manifold. Maybe the lower temperatures
are contracting something enough to lose a good ground.
Thanks,
John Brunke
>
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|