----------------------------------------------------------
                           RV7-List Digest Archive
                                      ---
                     Total Messages Posted Sat 02/19/05: 1
           ----------------------------------------------------------
 
 
Today's Message Index:
----------------------
 
     1. 06:55 AM - Re: Help..."Extra" holes in wing spar stub and F704 pieces?  (Sargentclt@cs.com)
 
 
 
________________________________  Message 1  _____________________________________


Time: 06:55:43 AM PST US
From: Sargentclt@cs.com
Subject: Re: RV7-List: Help..."Extra" holes in wing spar stub and F704 pieces?

--> RV7-List message posted by: Sargentclt@cs.com

Look carefully on the plans there are a few holes that are for tooling 
purposes and will not have a rivet installed.  These were possibly there to hold
the 
piece in place in a fixture or jig in order to match drill the spars 
together.  You are right to check 2-3-4 times and then drill. 
Good luck

Tad Sargent
Sargentclt(at)CS.com
RV7A