---------------------------------------------------------- RV7-List Digest Archive --- Total Messages Posted Tue 03/01/05: 1 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 06:59 AM - Re: RV7-List Digest: 1 Msgs - 02/28/05 (Jim Lundell) ________________________________ Message 1 _____________________________________ Time: 06:59:31 AM PST US Subject: RV7-List: Re: RV7-List Digest: 1 Msgs - 02/28/05 From: "Jim Lundell" --> RV7-List message posted by: "Jim Lundell" Joe Sorry to hear that. Now you've got another couple of daily tasks. But I think you will see a definite improvement in his behavior after he's had the shots for awhile. JimL On Mon, 28 Feb 2005 23:57:32 -0800, RV7-List Digest Server wrote: > * > > ================================================== > Online Versions of Today's List Digest Archive > ================================================== > > Today's complete RV7-List Digest can also be found in either of the > two Web Links listed below. The .html file includes the Digest formatted > in HTML for viewing with a web browser and features Hyperlinked Indexes > and Message Navigation. The .txt file includes the plain ASCII version > of the RV7-List Digest and can be viewed with a generic text editor > such as Notepad or with a web browser. > > HTML Version: > > http://www.matronics.com/digest/rv7-list/Digest.RV7-List.2005-02-28.html > > Text Version: > > http://www.matronics.com/digest/rv7-list/Digest.RV7-List.2005-02-28.txt > > > ================================================ > EMail Version of Today's List Digest Archive > ================================================ > > RV7-List Digest Archive > --- > Total Messages Posted Mon 02/28/05: 1 > Today's Message Index: > ---------------------- > 1. 08:13 PM - Lower Rudder Tip (Scott Farner) > ________________________________ Message 1 > _____________________________________ > > > Time: 08:13:36 PM PST US > From: Scott Farner > Subject: RV7-List: Lower Rudder Tip > > --> RV7-List message posted by: Scott Farner > > I am working on the lower rudder tip and the part of the tip forward > of the control horn doesn't sit flat against the spar. There aren't > any attach points noted in the plans here and I was wondering if > anyone else had this problem and what was the remedy. > > Thanks, > -- Using M2, Opera's revolutionary e-mail client: http://www.opera.com/m2/