---------------------------------------------------------- RV7-List Digest Archive --- Total Messages Posted Thu 04/28/05:1 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 02:57 AM - Re: RV7-List Digest:0 Msgs - 04/24/05 (Cliff Lotter) ________________________________ Message 1 _____________________________________ Time: 02:57:58 AM PST US From: "Cliff Lotter" Subject: RV7-List: Re: RV7-List Digest:0 Msgs - 04/24/05 --> RV7-List message posted by: "Cliff Lotter" Can I set up the wing incidence and drill the rear spar to wing holes with just the 'hardware shop" 7/16 location bolts fitted, as there is quite a bit of play in the vertical plane when moving the wings up and down? Regards Cliff lotter do not archive ----- Original Message ----- From: "RV7-List Digest Server" Subject: RV7-List Digest:0 Msgs - 04/24/05 > * > > ================================================== > Online Versions of Today's List Digest Archive > ================================================== > > Today's complete RV7-List Digest can also be found in either of the > two Web Links listed below. The .html file includes the Digest formatted > in HTML for viewing with a web browser and features Hyperlinked Indexes > and Message Navigation. The .txt file includes the plain ASCII version > of the RV7-List Digest and can be viewed with a generic text editor > such as Notepad or with a web browser. > > HTML Version: > > http://www.matronics.com/digest/rv7-list/Digest.RV7-List.2005-04-24.html > > Text Version: > > http://www.matronics.com/digest/rv7-list/Digest.RV7-List.2005-04-24.txt > > > ================================================ > EMail Version of Today's List Digest Archive > ================================================ > > > RV7-List Digest Archive > --- > Total Messages Posted Sun 04/24/05:0 > > > Today's Message Index: > ---------------------- > >