----------------------------------------------------------
                           RV7-List Digest Archive
                                      ---
                     Total Messages Posted Thu 05/12/05:3
           ----------------------------------------------------------
 
 
Today's Message Index:
----------------------
 
     1. 10:52 AM - F-705G - Tip up canopy only ... ?  (Gerry Filby)
     2. 06:28 PM - Re: F-705G - Tip up canopy only ... ?  (ramthaxton@comcast.net)
     3. 07:38 PM - Re: F-705G - Tip up canopy only ... ?  (Mark Taylor)
 
 
 
________________________________  Message 1  _____________________________________


Time: 10:52:14 AM PST US
Subject: RV7-List: F-705G - Tip up canopy only ... ?
From: Gerry Filby <gerf@gerf.com>

--> RV7-List message posted by: Gerry Filby <gerf@gerf.com>


I know these angles are required for the tip-up canopy and I'm 
fairly sure should be ommited completely for the slider canopy, 
but wanted to check with others ... can anyone confirm ?

__g__

========================================================== 
Gerry Filby                                  gerf@gerf.com
                   Tel: 415 203 9177






________________________________  Message 2  _____________________________________


Time: 06:28:03 PM PST US
From: ramthaxton@comcast.net
Subject: Re: RV7-List: F-705G - Tip up canopy only ... ?

--> RV7-List message posted by: ramthaxton@comcast.net

One of the guys at Vans told me to just leave them in since I had already installed
them. What a pain to remove them later when it became apparent  that they
caused interference with the bolts for the rear canopy hold down blocks. 
Bob Thaxton RV-7 N711RT

-------------- Original message -------------- 

> --> RV7-List message posted by: Gerry Filby 
> 
> 
> I know these angles are required for the tip-up canopy and I'm 
> fairly sure should be ommited completely for the slider canopy, 
> but wanted to check with others ... can anyone confirm ? 
> 
> __g__ 
>Van========================================================== 
> Gerry Filby gerf@gerf.com 
> Tel: 415 203 9177 
> 
> 
> 
> 
> 
> 

One of the guys at Vans told me to just leave them in since I had already installed
them. What a pain to remove them later when it became apparent that they
caused interference with the bolts for the rear canopy hold down blocks. 
Bob Thaxton RV-7 N711RT

-------------- Original message -------------- 

 -- RV7-List message posted by: Gerry Filby <GERF@GERF.COM>


 I know these angles are required for the tip-up canopy and I'm 
 fairly sure should be ommited completely for the slider canopy, 
 but wanted to check with others ... can anyone confirm ? 

 __g__ 
Van========================================================== 
 Gerry Filby gerf@gerf.com 
 Tel: 415 203 9177 






________________________________  Message 3  _____________________________________


Time: 07:38:24 PM PST US
From: "Mark Taylor" <mtaylo17@msn.com>
Subject: Re: RV7-List: F-705G - Tip up canopy only ... ?

--> RV7-List message posted by: "Mark Taylor" <mtaylo17@msn.com>

Oh great. I got a quickbuild and they're still in my fuselage. I've painted 
now as well.

Mark Taylor
www.4sierratango.com

>From: ramthaxton@comcast.net
>Reply-To: rv7-list@matronics.com
>To: rv7-list@matronics.com
>Subject: Re: RV7-List: F-705G - Tip up canopy only ... ?
>Date: Fri, 13 May 2005 01:27:22 +0000
>
>--> RV7-List message posted by: ramthaxton@comcast.net
>
>One of the guys at Vans told me to just leave them in since I had already 
>installed them. What a pain to remove them later when it became apparent  
>that they caused interference with the bolts for the rear canopy hold down 
>blocks.
>Bob Thaxton RV-7 N711RT
>
>-------------- Original message --------------
>
> > --> RV7-List message posted by: Gerry Filby
> >
> >
> > I know these angles are required for the tip-up canopy and I'm
> > fairly sure should be ommited completely for the slider canopy,
> > but wanted to check with others ... can anyone confirm ?
> >
> > __g__
> >Van==========================================================
> > Gerry Filby gerf@gerf.com
> > Tel: 415 203 9177
> >
> >
> >
> >
> >
> >
>
>One of the guys at Vans told me to just leave them in since I had already 
>installed them. What a pain to remove them later when it became apparent 
>that they caused interference with the bolts for the rear canopy hold down 
>blocks.
>Bob Thaxton RV-7 N711RT
>
>-------------- Original message --------------
>
>  -- RV7-List message posted by: Gerry Filby <GERF@GERF.COM>
>
>
>  I know these angles are required for the tip-up canopy and I'm
>  fairly sure should be ommited completely for the slider canopy,
>  but wanted to check with others ... can anyone confirm ?
>
>  __g__
>Van==========================================================
>  Gerry Filby gerf@gerf.com
>  Tel: 415 203 9177
>
>