---------------------------------------------------------- RV7-List Digest Archive --- Total Messages Posted Tue 06/07/05: 4 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 04:45 AM - glueing rudder aft edge (Don Hall) 2. 05:51 AM - Fitting/aligning the flaps/ailerons (David E. Nelson) 3. 07:32 AM - Re: Fitting/aligning the flaps/ailerons 15, 2004) at 06/07/2005 07:50:04 AM, Serialize by Router on MailServ58-US/AUS/H/NIC(Release 6.5.3FP1|December 15, 2004) at 06/07/2005 07:50:07 AM, Serialize complete at 06/07/2005 07:50:07 AM (Hinde, Frank George (Corvallis)) 4. 07:35 AM - Re: glueing rudder aft edge (Hinde, Frank George (Corvallis)) ________________________________ Message 1 _____________________________________ Time: 04:45:33 AM PST US From: "Don Hall" Subject: RV7-List: glueing rudder aft edge --> RV7-List message posted by: "Don Hall" I don't feel like doing pro-seal. Any other glues you'd recommend for this job? Preferrably something at home depot or ace... ________________________________ Message 2 _____________________________________ Time: 05:51:54 AM PST US From: "David E. Nelson" Subject: RV7-List: Fitting/aligning the flaps/ailerons 15, 2004) at 06/07/2005 07:50:04 AM, Serialize by Router on MailServ58-US/AUS/H/NIC(Release 6.5.3FP1|December 15, 2004) at 06/07/2005 07:50:07 AM, Serialize complete at 06/07/2005 07:50:07 AM --> RV7-List message posted by: "David E. Nelson" Dan, Norman, and Frank, Thanks for the responses. Got the right aileron squared away yesterday evening and started on the flap hinge using a #41 drill (as that is what seemed to fit dimpled holes) to initially mark the holes on the hinge and then followed up with a #40. Edge distance is Ok and I think it'll all work out just fine. If not, I can always order some more hinge and try again. ;) A couple of lessons have been learned from this experience and that's a good thing - I just hope that if I do this all over again many years from now I'll remember them. Thanks again, /\/elson RV-7A - Flaps and ailerons Austin, TX -- ~~ ** ~~ 4 out of 3 people have problems with fractions ~~ ** ~~ ________________________________ Message 3 _____________________________________ Time: 07:32:23 AM PST US Subject: RE: RV7-List: Fitting/aligning the flaps/ailerons 15, 2004) at 06/07/2005 07:50:04 AM, Serialize by Router on MailServ58-US/AUS/H/NIC(Release 6.5.3FP1|December 15, 2004) at 06/07/2005 07:50:07 AM, Serialize complete at 06/07/2005 07:50:07 AM From: "Hinde, Frank George (Corvallis)" --> RV7-List message posted by: "Hinde, Frank George (Corvallis)" You will have no chance of remembering...I have built a metal plane before about 5 years ago and still I am amazed at some of the screw ups I've made...Maybe its age...:) All the best David Frank Do not archive -----Original Message----- From: owner-rv7-list-server@matronics.com [mailto:owner-rv7-list-server@matronics.com] On Behalf Of David E. Nelson Subject: RV7-List: Fitting/aligning the flaps/ailerons 15, 2004) at 06/07/2005 07:50:04 AM, Serialize by Router on MailServ58-US/AUS/H/NIC(Release 6.5.3FP1|December 15, 2004) at 06/07/2005 07:50:07 AM, Serialize complete at 06/07/2005 07:50:07 AM --> RV7-List message posted by: "David E. Nelson" --> Dan, Norman, and Frank, Thanks for the responses. Got the right aileron squared away yesterday evening and started on the flap hinge using a #41 drill (as that is what seemed to fit dimpled holes) to initially mark the holes on the hinge and then followed up with a #40. Edge distance is Ok and I think it'll all work out just fine. If not, I can always order some more hinge and try again. ;) A couple of lessons have been learned from this experience and that's a good thing - I just hope that if I do this all over again many years from now I'll remember them. Thanks again, /\/elson RV-7A - Flaps and ailerons Austin, TX -- ~~ ** ~~ 4 out of 3 people have problems with fractions ~~ ** ~~ ________________________________ Message 4 _____________________________________ Time: 07:35:46 AM PST US Subject: RE: RV7-List: glueing rudder aft edge From: "Hinde, Frank George (Corvallis)" --> RV7-List message posted by: "Hinde, Frank George (Corvallis)" Vulkem 116 sealant sold at Home Depot....It is THE duct sealant used by all my contractors for a large wafer fab...When it sets up it sticks like you won't believe and stays gooey. Oh and is perfectly compatible with Aluminium. Frank -----Original Message----- From: owner-rv7-list-server@matronics.com [mailto:owner-rv7-list-server@matronics.com] On Behalf Of Don Hall Subject: RV7-List: glueing rudder aft edge --> RV7-List message posted by: "Don Hall" I don't feel like doing pro-seal. Any other glues you'd recommend for this job? Preferrably something at home depot or ace...