Today's Message Index:
----------------------
1. 05:03 AM - Re: Builder assist with fuel tanks (BERNDSENCO@aol.com)
2. 05:18 AM - Re: Builder assist with fuel tanks ()
3. 06:46 AM - Re: Re: RV7-List Digest: 2 Msgs - 06/08/05 (Frank Stringham)
4. 07:03 AM - Re: Re: RV7-List Digest: 2 Msgs - 06/08/05 (Norman Younie)
5. 07:43 AM - Re: Re: RV7-List Digest: 2 Msgs - 06/08/05 (Paul Folbrecht)
6. 08:31 PM - Dimple Problem (Norm Tatz)
7. 08:52 PM - Re: Dimple Problem (Scott Farner)
Message 1
| INDEX | Back to Main INDEX |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Builder assist with fuel tanks |
HTML_NONELEMENT_00_10@roxy.matronics.com, BODY:, to@roxy.matronics.com,
of@roxy.matronics.com, HTML@roxy.matronics.com,
elements@roxy.matronics.com, are@roxy.matronics.com,
non-standard@roxy.matronics.com
--> RV7-List message posted by: BERNDSENCO@aol.com
Rick,
Contact Doug Ripley at Sport Air, Inc. here in Atlanta. He runs a full
service Builder Assist Shop and specializes in RV's. Does very high quality
work. _doug@sportairinc.com_ (mailto:doug@sportairinc.com) 404-403-9208
_http://www.sportairinc.com/_ (http://www.sportairinc.com/)
Jon Berndsen
RV-7A
In a message dated 6/13/2005 3:01:30 A.M. Eastern Standard Time,
rv7-list-digest@matronics.com writes:
Time: 03:26:04 PM PST US
From: ENAJRICK@aol.com
Subject: RV7-List: Re: RV7-List Digest: 2 Msgs - 06/08/05
--> RV7-List message posted by: ENAJRICK@aol.com
I'm considering sending my fuel tanks out to be done. Since i'm building
the
slow wings any help with speeding the process can't hurt and with all I've
read about pro-seal, well let's just say I wasn't looking forward to it.
Does
anyone know where I can get this done? I read on Van's site that they do -9
wings for about $1,600./pair but did not see anything about the -7. I
checked
out Evan's site and it looks promising. Are there any other options? Does
anyone have experience with Evan's. Thanks for any help.
Rick Rammos
Miami
RV-7A / wings
Message 2
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Builder assist with fuel tanks |
"IMB Recipient 1" <mspop3connector.Droopy@ericksonjc.com>
--> RV7-List message posted by: <BERNDSENCO@aol.com>
--> RV7-List message posted by: BERNDSENCO@aol.com
Rick,
Contact Doug Ripley at Sport Air, Inc. here in Atlanta. He runs a full
service Builder Assist Shop and specializes in RV's. Does very high quality
work. _doug@sportairinc.com_ (mailto:doug@sportairinc.com) 404-403-9208
_http://www.sportairinc.com/_ (http://www.sportairinc.com/)
Jon Berndsen
RV-7A
In a message dated 6/13/2005 3:01:30 A.M. Eastern Standard Time,
rv7-list-digest@matronics.com writes:
Time: 03:26:04 PM PST US
From: ENAJRICK@aol.com
Subject: RV7-List: Re: RV7-List Digest: 2 Msgs - 06/08/05
--> RV7-List message posted by: ENAJRICK@aol.com
I'm considering sending my fuel tanks out to be done. Since i'm building
the
slow wings any help with speeding the process can't hurt and with all I've
read about pro-seal, well let's just say I wasn't looking forward to it.
Does
anyone know where I can get this done? I read on Van's site that they do -9
wings for about $1,600./pair but did not see anything about the -7. I
checked
out Evan's site and it looks promising. Are there any other options? Does
anyone have experience with Evan's. Thanks for any help.
Rick Rammos
Miami
RV-7A / wings
Message 3
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: RV7-List Digest: 2 Msgs - 06/08/05 |
--> RV7-List message posted by: Frank Stringham <fstringham7a@yahoo.com>
Rick
I felt like you ....but ....decide I would give the process a try. Much to my surprise
it wasn't as big a headache as I thought. I learned a bunch of things
and new techniques that will help me on the rest of the plane. I just wish I knew
them when I started the tanks in stead of learning through trial and error.
I wish I lived closer or had my plane done and could come and help you do your
tanks. If you decide to give the process a try e-mail me off line fstringham@hotmail.com
or give me a call 435-632-6895 and I would be happy to give you
the info as to what worked for me.
Frank @ sgu and slc
ENAJRICK@aol.com wrote:
--> RV7-List message posted by: ENAJRICK@aol.com
I'm considering sending my fuel tanks out to be done. Since i'm building the
slow wings any help with speeding the process can't hurt and with all I've
read about pro-seal, well let's just say I wasn't looking forward to it. Does
anyone know where I can get this done? I read on Van's site that they do -9
wings for about $1,600./pair but did not see anything about the -7. I checked
out Evan's site and it looks promising. Are there any other options? Does
anyone have experience with Evan's. Thanks for any help.
Rick Rammos
Miami
RV-7A / wings
Message 4
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: RV7-List Digest: 2 Msgs - 06/08/05 |
--> RV7-List message posted by: Norman Younie <rv6capt@pacificcoast.net>
Hey Rick don't let people scare you off of building them yourself, its
no big deal. I have build four sets of them now.
ENAJRICK@aol.com wrote:
>--> RV7-List message posted by: ENAJRICK@aol.com
>
>I'm considering sending my fuel tanks out to be done. Since i'm building the
>slow wings any help with speeding the process can't hurt and with all I've
>read about pro-seal, well let's just say I wasn't looking forward to it. Does
>anyone know where I can get this done? I read on Van's site that they do -9
>wings for about $1,600./pair but did not see anything about the -7. I checked
>out Evan's site and it looks promising. Are there any other options? Does
>anyone have experience with Evan's. Thanks for any help.
>
>Rick Rammos
>Miami
>RV-7A / wings
>
>
>
>
Message 5
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: RV7-List Digest: 2 Msgs - 06/08/05 |
--> RV7-List message posted by: Paul Folbrecht <paulfolbrecht@yahoo.com>
I remember reading somewhere that Van's was discontinuing the pre-built
tanks, and once they get rid of the ones they have now that's it.
do not archive
>
>
>>--> RV7-List message posted by: ENAJRICK@aol.com
>>
>>I'm considering sending my fuel tanks out to be done. Since i'm building the
>>slow wings any help with speeding the process can't hurt and with all I've
>>read about pro-seal, well let's just say I wasn't looking forward to it. Does
>>anyone know where I can get this done? I read on Van's site that they do -9
>>wings for about $1,600./pair but did not see anything about the -7. I checked
>>out Evan's site and it looks promising. Are there any other options? Does
>>anyone have experience with Evan's. Thanks for any help.
>>
>>Rick Rammos
>>Miami
>>RV-7A / wings
>>
>>
>>
>>
>>
>>
>
>
>
>
Message 6
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
--> RV7-List message posted by: Norm Tatz <normtatz@shaw.ca>
I had a misfire while dimpling my vertical stabilizer skin and now have an
offset, elongated and mis-formed dimple. A search of the archives shows no
previous topics - am I the first to make this mistake? Any recommendations
for a fix?
Thanks in advance,
Norm Tatz
RV-7 Empennage
Message 7
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Dimple Problem |
--> RV7-List message posted by: Scott Farner <sfarner@gmail.com>
Norm,
Check out this link:
http://www.rvproject.com/20020824.html
--
Scott
www.scottfarner.com
Waiting for Fuse
On 6/13/05, Norm Tatz <normtatz@shaw.ca> wrote:
> --> RV7-List message posted by: Norm Tatz <normtatz@shaw.ca>
>
> I had a misfire while dimpling my vertical stabilizer skin and now have an
> offset, elongated and mis-formed dimple. A search of the archives shows no
> previous topics - am I the first to make this mistake? Any recommendations
> for a fix?
>
>
> Thanks in advance,
>
>
> Norm Tatz
>
> RV-7 Empennage
>
>
>
>
>
>
>
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|