---------------------------------------------------------- RV7-List Digest Archive --- Total Messages Posted Mon 06/13/05: 7 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 05:03 AM - Re: Builder assist with fuel tanks (BERNDSENCO@aol.com) 2. 05:18 AM - Re: Builder assist with fuel tanks () 3. 06:46 AM - Re: Re: RV7-List Digest: 2 Msgs - 06/08/05 (Frank Stringham) 4. 07:03 AM - Re: Re: RV7-List Digest: 2 Msgs - 06/08/05 (Norman Younie) 5. 07:43 AM - Re: Re: RV7-List Digest: 2 Msgs - 06/08/05 (Paul Folbrecht) 6. 08:31 PM - Dimple Problem (Norm Tatz) 7. 08:52 PM - Re: Dimple Problem (Scott Farner) ________________________________ Message 1 _____________________________________ Time: 05:03:05 AM PST US From: BERNDSENCO@aol.com Subject: RV7-List: Re: Builder assist with fuel tanks HTML_NONELEMENT_00_10@roxy.matronics.com, BODY:, to@roxy.matronics.com, of@roxy.matronics.com, HTML@roxy.matronics.com, elements@roxy.matronics.com, are@roxy.matronics.com, non-standard@roxy.matronics.com --> RV7-List message posted by: BERNDSENCO@aol.com Rick, Contact Doug Ripley at Sport Air, Inc. here in Atlanta. He runs a full service Builder Assist Shop and specializes in RV's. Does very high quality work. _doug@sportairinc.com_ (mailto:doug@sportairinc.com) 404-403-9208 _http://www.sportairinc.com/_ (http://www.sportairinc.com/) Jon Berndsen RV-7A In a message dated 6/13/2005 3:01:30 A.M. Eastern Standard Time, rv7-list-digest@matronics.com writes: Time: 03:26:04 PM PST US From: ENAJRICK@aol.com Subject: RV7-List: Re: RV7-List Digest: 2 Msgs - 06/08/05 --> RV7-List message posted by: ENAJRICK@aol.com I'm considering sending my fuel tanks out to be done. Since i'm building the slow wings any help with speeding the process can't hurt and with all I've read about pro-seal, well let's just say I wasn't looking forward to it. Does anyone know where I can get this done? I read on Van's site that they do -9 wings for about $1,600./pair but did not see anything about the -7. I checked out Evan's site and it looks promising. Are there any other options? Does anyone have experience with Evan's. Thanks for any help. Rick Rammos Miami RV-7A / wings ________________________________ Message 2 _____________________________________ Time: 05:18:50 AM PST US From: Subject: RV7-List: Re: Builder assist with fuel tanks "IMB Recipient 1" --> RV7-List message posted by: --> RV7-List message posted by: BERNDSENCO@aol.com Rick, Contact Doug Ripley at Sport Air, Inc. here in Atlanta. He runs a full service Builder Assist Shop and specializes in RV's. Does very high quality work. _doug@sportairinc.com_ (mailto:doug@sportairinc.com) 404-403-9208 _http://www.sportairinc.com/_ (http://www.sportairinc.com/) Jon Berndsen RV-7A In a message dated 6/13/2005 3:01:30 A.M. Eastern Standard Time, rv7-list-digest@matronics.com writes: Time: 03:26:04 PM PST US From: ENAJRICK@aol.com Subject: RV7-List: Re: RV7-List Digest: 2 Msgs - 06/08/05 --> RV7-List message posted by: ENAJRICK@aol.com I'm considering sending my fuel tanks out to be done. Since i'm building the slow wings any help with speeding the process can't hurt and with all I've read about pro-seal, well let's just say I wasn't looking forward to it. Does anyone know where I can get this done? I read on Van's site that they do -9 wings for about $1,600./pair but did not see anything about the -7. I checked out Evan's site and it looks promising. Are there any other options? Does anyone have experience with Evan's. Thanks for any help. Rick Rammos Miami RV-7A / wings ________________________________ Message 3 _____________________________________ Time: 06:46:58 AM PST US From: Frank Stringham Subject: Re: RV7-List: Re: RV7-List Digest: 2 Msgs - 06/08/05 --> RV7-List message posted by: Frank Stringham Rick I felt like you ....but ....decide I would give the process a try. Much to my surprise it wasn't as big a headache as I thought. I learned a bunch of things and new techniques that will help me on the rest of the plane. I just wish I knew them when I started the tanks in stead of learning through trial and error. I wish I lived closer or had my plane done and could come and help you do your tanks. If you decide to give the process a try e-mail me off line fstringham@hotmail.com or give me a call 435-632-6895 and I would be happy to give you the info as to what worked for me. Frank @ sgu and slc ENAJRICK@aol.com wrote: --> RV7-List message posted by: ENAJRICK@aol.com I'm considering sending my fuel tanks out to be done. Since i'm building the slow wings any help with speeding the process can't hurt and with all I've read about pro-seal, well let's just say I wasn't looking forward to it. Does anyone know where I can get this done? I read on Van's site that they do -9 wings for about $1,600./pair but did not see anything about the -7. I checked out Evan's site and it looks promising. Are there any other options? Does anyone have experience with Evan's. Thanks for any help. Rick Rammos Miami RV-7A / wings ________________________________ Message 4 _____________________________________ Time: 07:03:40 AM PST US From: Norman Younie Subject: Re: RV7-List: Re: RV7-List Digest: 2 Msgs - 06/08/05 --> RV7-List message posted by: Norman Younie Hey Rick don't let people scare you off of building them yourself, its no big deal. I have build four sets of them now. ENAJRICK@aol.com wrote: >--> RV7-List message posted by: ENAJRICK@aol.com > >I'm considering sending my fuel tanks out to be done. Since i'm building the >slow wings any help with speeding the process can't hurt and with all I've >read about pro-seal, well let's just say I wasn't looking forward to it. Does >anyone know where I can get this done? I read on Van's site that they do -9 >wings for about $1,600./pair but did not see anything about the -7. I checked >out Evan's site and it looks promising. Are there any other options? Does >anyone have experience with Evan's. Thanks for any help. > >Rick Rammos >Miami >RV-7A / wings > > > > ________________________________ Message 5 _____________________________________ Time: 07:43:45 AM PST US From: Paul Folbrecht Subject: Re: RV7-List: Re: RV7-List Digest: 2 Msgs - 06/08/05 --> RV7-List message posted by: Paul Folbrecht I remember reading somewhere that Van's was discontinuing the pre-built tanks, and once they get rid of the ones they have now that's it. do not archive > > >>--> RV7-List message posted by: ENAJRICK@aol.com >> >>I'm considering sending my fuel tanks out to be done. Since i'm building the >>slow wings any help with speeding the process can't hurt and with all I've >>read about pro-seal, well let's just say I wasn't looking forward to it. Does >>anyone know where I can get this done? I read on Van's site that they do -9 >>wings for about $1,600./pair but did not see anything about the -7. I checked >>out Evan's site and it looks promising. Are there any other options? Does >>anyone have experience with Evan's. Thanks for any help. >> >>Rick Rammos >>Miami >>RV-7A / wings >> >> >> >> >> >> > > > > ________________________________ Message 6 _____________________________________ Time: 08:31:24 PM PST US From: Norm Tatz Subject: RV7-List: Dimple Problem --> RV7-List message posted by: Norm Tatz I had a misfire while dimpling my vertical stabilizer skin and now have an offset, elongated and mis-formed dimple. A search of the archives shows no previous topics - am I the first to make this mistake? Any recommendations for a fix? Thanks in advance, Norm Tatz RV-7 Empennage ________________________________ Message 7 _____________________________________ Time: 08:52:47 PM PST US From: Scott Farner Subject: Re: RV7-List: Dimple Problem --> RV7-List message posted by: Scott Farner Norm, Check out this link: http://www.rvproject.com/20020824.html -- Scott www.scottfarner.com Waiting for Fuse On 6/13/05, Norm Tatz wrote: > --> RV7-List message posted by: Norm Tatz > > I had a misfire while dimpling my vertical stabilizer skin and now have an > offset, elongated and mis-formed dimple. A search of the archives shows no > previous topics - am I the first to make this mistake? Any recommendations > for a fix? > > > Thanks in advance, > > > Norm Tatz > > RV-7 Empennage > > > > > > >