----------------------------------------------------------
                           RV7-List Digest Archive
                                      ---
                     Total Messages Posted Fri 06/17/05: 2
           ----------------------------------------------------------
 
 
Today's Message Index:
----------------------
 
     1. 06:22 AM - Re: Fitting the firewall recess  (David E. Nelson)
     2. 02:46 PM - Dan Checkoway's First Article in Kitplanes Magazine  (Cory Emberson)
 
 
 
________________________________  Message 1  _____________________________________


Time: 06:22:44 AM PST US
From: "David E. Nelson" <david.nelson@pobox.com>
Subject: Re: RV7-List: Fitting the firewall recess
 15, 2004) at 06/17/2005 08:21:15 AM,
        Serialize by Router on MailServ58-US/AUS/H/NIC(Release 6.5.3FP1|December
15, 2004) at
 06/17/2005 08:21:55 AM,
        Serialize complete at 06/17/2005 08:21:55 AM

--> RV7-List message posted by: "David E. Nelson" <david.nelson@pobox.com>


Thanks Walter,

          /\/elson
          Austin, TX
          RV-7A - Fuse

do not archive

On Wed, 15 Jun 2005, Walter Tondu wrote:

> --> RV7-List message posted by: Walter Tondu <walter@tondu.com>
>
> On 06/15  8:14, David E. Nelson wrote:
>
> > Got started on the firewall and the fit of the recess is causing me fits. 
All
> > the holes line up except the top two (#30's).  I have to really bend/push/shove
> > the cleco to get it in which isn't right.  And there's no way I'm going to
be
> > able to get a rivet in there and properly seated.
> >
> > Is this normal do I possibly have a malformed/malpunched recess?
>
> That's a fairly normal situation.  Don't sweat it.  You are going to
> proseal that puppy in place anyhow.  Just get it in as best as you
> can.  If there are small gaps, they'll be covered with the goop.
>
>

-- 
~~ ** ~~ 4 out of 3 people have problems with fractions ~~ ** ~~






________________________________  Message 2  _____________________________________


Time: 02:46:33 PM PST US
From: "Cory Emberson" <bootless@earthlink.net>
Subject: RV7-List: Dan Checkoway's First Article in Kitplanes Magazine

--> RV7-List message posted by: "Cory Emberson" <bootless@earthlink.net>

Hi Dan and all...

Just got my new (August) copy of Kitplanes magazine, and lo and behold,
there's the first in a series by Dan Checkoway ("Made in Metal" - Build Your
Skills series)! Way to go, Dan!

best, Cory