---------------------------------------------------------- RV7-List Digest Archive --- Total Messages Posted Thu 07/28/05: 2 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 09:07 AM - Map Box (Hinde, Frank George (Corvallis)) 2. 09:48 AM - Re: Map Box (Dan Checkoway) ________________________________ Message 1 _____________________________________ Time: 09:07:55 AM PST US Subject: RV7-List: Map Box From: "Hinde, Frank George (Corvallis)" --> RV7-List message posted by: "Hinde, Frank George (Corvallis)" Hi guys, The drawing for the map box shows cut out's in two different location on the instrument pnel depending on whether it is a tip-up or slider canopy. The tip up is shown lower on theinstrument panel than the slider. I have a tip up but want to pit the map box up higher like on the slider to fit the Dynon engine instrument under the map box. It will fit but only if the map box is up higher. I can't see any reason the map box can't go up high but wondered if anyone had any actual experience on this...i did phone Van's but guess where they are?..:) Thanks Frank ________________________________ Message 2 _____________________________________ Time: 09:48:23 AM PST US From: "Dan Checkoway" Subject: Re: RV7-List: Map Box --> RV7-List message posted by: "Dan Checkoway" The tip up frame, the C channel at the front of the canopy, comes down about 2 or 3 inches from the top. That's about all I can think of at the moment... )_( Dan RV-7 N714D http://www.rvproject.com ----- Original Message ----- From: "Hinde, Frank George (Corvallis)" Subject: RV7-List: Map Box > --> RV7-List message posted by: "Hinde, Frank George (Corvallis)" > > > Hi guys, > > The drawing for the map box shows cut out's in two different location on > the instrument pnel depending on whether it is a tip-up or slider > canopy. > > The tip up is shown lower on theinstrument panel than the slider. > > I have a tip up but want to pit the map box up higher like on the slider > to fit the Dynon engine instrument under the map box. It will fit but > only if the map box is up higher. > > I can't see any reason the map box can't go up high but wondered if > anyone had any actual experience on this...i did phone Van's but guess > where they are?..:) > > Thanks > > Frank > > >