---------------------------------------------------------- RV7-List Digest Archive --- Total Messages Posted Thu 10/20/05: 1 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 05:32 AM - Re: exp2v bus dc load (Peter DeCraene) ________________________________ Message 1 _____________________________________ Time: 05:32:54 AM PST US From: "Peter DeCraene" Subject: Re: RV7-List: exp2v bus dc load Ilan The x-bus simply replaces the circuit breakers shown in the wiring diagrams from Van's. Power to the x-bus is supplied from the alternator to the x-bus the same as it would be to a bus bar or fuse block. The over current protection is provided by the x-bus elimanating fuses and breakers with the exception of the main breaker from the source. x-bus has outputs for each of the loads you will need to serve. On my panel I removed the switches from the x-bus pc board so that I could mount the switches in my panel where I wanted them. I have never had an overload or any condition that would cause the x-bus to trip, but I did while I was testing things prior to flight and the x-bus worked fine. I have a couple of pictures of my panel on my web site and I'm sure I have more if you need them, let me know. Pete 526PD http://www.ews.uiuc.edu/~decraene/index.htm ----- Original Message ----- From: i.perry@lipogen.co.il To: rv7-list@matronics.com Sent: Wednesday, October 19, 2005 9:08 AM Subject: Re: RV7-List: exp2v bus dc load Hi pete !Can you be more accurate regarding integration betweenEXP2v BUS.. and ESWH7 kits. Thanks Ilan perry. ----- Original Message ----- From: Peter DeCraene To: rv7-list@matronics.com Sent: Wednesday, October 19, 2005 12:10 AM Subject: Re: RV7-List: exp2v bus dc load we used the x-bus and also bought the electric wiring kit from van's. I was able to use most of what came with the wiring kit and it served as a good starting point for the wiring. I t also had some basic wiring diagrams that helped. I did take the wiring harness apart but used all of the wire, and bought alot more. Pete DeCraene N526PD ----- Original Message ----- From: i.perry@lipogen.co.il To: rv7-list@matronics.com Sent: Tuesday, October 18, 2005 3:46 PM Subject: RV7-List: exp2v bus dc load Hi !there is anyone with an experience with EXP2VBUS dc load center kit,and van's -es wh7kit (wire harness).integration between both of kits.Best regards i.perry.