----------------------------------------------------------
                           RV7-List Digest Archive
                                      ---
                     Total Messages Posted Sat 10/22/05: 4
           ----------------------------------------------------------
 
 
Today's Message Index:
----------------------
 
     1. 09:19 AM - wrong capacitive kit?  (Don Hall)
     2. 10:41 AM - Re: wrong capacitive kit?  (William Gill)
     3. 12:08 PM - Re: wrong capacitive kit?  (JohnCClarkVA@cs.com)
     4. 04:53 PM - Re: wrong capacitive kit?  (LarryRobertHelming)
 
 
 
________________________________  Message 1  _____________________________________


Time: 09:19:59 AM PST US
From: "Don Hall" <dhall@donka.net>
Subject: RV7-List: wrong capacitive kit?

Van's sent me an rv9 capacitive fuel qty sender kit.   The drawing is for an
rv9 wing.  The plates don't line up right.  This seems clearly wrong.  All
I'm wondering if this is one of those deals where I just might be expected
to make it work with a lot of trimming.  I'll call Van's on Monday, but
maybe I can get some confirmation on the list for the weekend...

Gosh dernit.  

******************************************
 Don Hall                  
 N517DG (registered)  
 rv7 wings
  <http://donka.net/rv7project.html> http:\\donka.net\rv7project.html
******************************************

________________________________  Message 2  _____________________________________


Time: 10:41:56 AM PST US
From: "William Gill" <wgill10@comcast.net>
Subject: RE: RV7-List: wrong capacitive kit?

Hello Don,

Send them back and get the correct plates. The proper plates will match
the wing contour and the only trimming necessary is the area around the
stiffener.

Have a great day,

Bill


-----Original Message-----
From: owner-rv7-list-server@matronics.com
[mailto:owner-rv7-list-server@matronics.com] On Behalf Of Don Hall
Subject: RV7-List: wrong capacitive kit?

Van's sent me an rv9 capacitive fuel qty sender kit.   The drawing is
for an rv9 wing.  The plates don't line up right.  This seems clearly
wrong.  All I'm wondering if this is one of those deals where I just
might be expected to make it work with a lot of trimming.  I'll call
Van's on Monday, but maybe I can get some confirmation on the list for
the weekend...

Gosh dernit.  

******************************************
 Don Hall                  
 N517DG (registered)  
 rv7 wings
  <http://donka.net/rv7project.html> http:\\donka.net\rv7project.html
******************************************

________________________________  Message 3  _____________________________________


Time: 12:08:28 PM PST US
From: JohnCClarkVA@cs.com
Subject: Re: RV7-List: wrong capacitive kit?

Also, the GRT converters are set up differently for the -9 and -7.  There is 
a potential for problems is the plates are not as expected by GRT.

________________________________  Message 4  _____________________________________


Time: 04:53:47 PM PST US
From: "LarryRobertHelming" <lhelming@sigecom.net>
Subject: Re: RV7-List: wrong capacitive kit?

Call or email Vans builder support.  You should have gotten a return form with
your parts.  They will replace free of charge and should pay all postage.  Their
fault unless you specifically ordered the wrong part that is.  Vans is vary
fair on things like this.  Good support. 

Indiana Larry


  ----- Original Message -----
  From: Don Hall
  To: rv7-list@matronics.com
  Sent: Saturday, October 22, 2005 11:17 AM
  Subject: RV7-List: wrong capacitive kit?


  Van's sent me an rv9 capacitive fuel qty sender kit.   The drawing is for an
rv9 wing. 
   http:\\donka.net\rv7project.html
  ******************************************