---------------------------------------------------------- RV7-List Digest Archive --- Total Messages Posted Thu 01/26/06: 2 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 07:31 AM - Garmin Xponder & Dynon EFIS (Larry Rush) 2. 01:07 PM - Re: Garmin Xponder & Dynon EFIS (Vern Little) ________________________________ Message 1 _____________________________________ Time: 07:31:56 AM PST US From: Larry Rush Subject: RV7-List: Garmin Xponder & Dynon EFIS Has anyone installed a GTX-327 Garmin Transponder and interwired it (RS-232) with the DYNON D10-A EFIS Encoder?? What set-up parameters did you use in each to get the Garmin to display Pressure Altitude etc. First install with full digital stuff !! Thanks, Larry, RV-6A @ 2R2, mentored a RV-8 flying, and a RV-7A in assm'y at hngr. "LIMA TANGO SENDS" ________________________________ Message 2 _____________________________________ Time: 01:07:15 PM PST US From: Vern Little Subject: Re: RV7-List: Garmin Xponder & Dynon EFIS --> RV7-List message posted by: Vern Little Larry Rush wrote: > Has anyone installed a GTX-327 Garmin Transponder and interwired it > (RS-232) with the DYNON D10-A EFIS Encoder?? What set-up parameters did > you use in each to get the Garmin to display Pressure Altitude etc. > First install with full digital stuff !! > Thanks, > Larry, RV-6A @ 2R2, mentored a RV-8 flying, and a RV-7A in assm'y at hngr. > > > "LIMA TANGO SENDS" Yes, I have. On the D10A serial output menu, set 'FORMAT 4'. On the GTX-327, choose either ICARUS or SHADIN format (I forgot which). As for the other settings, you'll have to play around. I've attached the GTX 327 install guide (on your private email, it will get stripped on the list). If this does not work, let me know and I'll copy the settings down when I get to the airport. It all works fine once you program it. Aside: The only peeve I have is that the GTX-327 can't take serial GPS data from a Garmin GPSMap 296! This data is used to determine automatic STBY mode for takeoff/landing. Garmin assumes you have a 430, and won't talk to non-IFR GPSs. Vern Little RV-9A 90577 C-FRVL Larry Rush wrote: > Has anyone installed a GTX-327 Garmin Transponder and interwired it (RS-232) with the DYNON D10-A EFIS Encoder?? What set-up parameters did you use in each to get the Garmin to display Pressure Altitude etc. First install with full digital stuff !! > Thanks, > Larry, RV-6A @ 2R2, mentored a RV-8 flying, and a RV-7A in assm'y at hngr. > > > "LIMA TANGO SENDS"