----------------------------------------------------------
                           RV7-List Digest Archive
                                      ---
                     Total Messages Posted Sun 02/12/06: 2
           ----------------------------------------------------------
 
 
Today's Message Index:
----------------------
 
     1. 06:15 AM - PVC-tube in the wings?  (Alf Olav Frog)
     2. 06:35 AM - Re: PVC-tube in the wings?  (Mark Taylor)
 
 
 
________________________________  Message 1  _____________________________________


Time: 06:15:50 AM PST US
From: Alf Olav Frog <alfolavf@online.no>
Subject: RV7-List: PVC-tube in the wings?

Hi builders!

Thanks for the inputs on the flap hinge! I'll go for the split-pin metod then!

Another one: 
I'm thinking towards intstalling wires in the wings also, and saw a builder on
the net who'd installed a small PVC-tube in the wings.
It made room for several wires (landing light, posn light, antenna etc)

Anyone else have done this?
It seems to me like a good idea??
Specially if I also put a light line in there so I can replace or add thing later.

Thoughts anyone??

Best regards Alf Olav Frog / Norway

________________________________  Message 2  _____________________________________


Time: 06:35:03 AM PST US
From: "Mark Taylor" <mtaylo17@msn.com>
Subject: RE: RV7-List: PVC-tube in the wings?

--> RV7-List message posted by: "Mark Taylor" <mtaylo17@msn.com>

Hi Alf,

I did this on mine. I used lawn irrigatoin tubing, which is very light, is 
thin walled and should last a long time. It was cheap too. The other thing 
to look out for is that the OD matches a hole cutter size you have. The 
irrigation tubing was exactly 3/4" OD. I'm not sure how that will work out 
for you in Norway though, everything being metric there, and I'm not so sure 
about the availability of such tubing there either. Here, it's readily 
available at any hardware store. See it at www.4sierratango.com/wings2.htm

Regards,

Mark
RV-7 Finishing & Firewall FWD.
www.4sierratango.com


>From: Alf Olav Frog <alfolavf@online.no>
>To: <rv7-list@matronics.com>
>Subject: RV7-List: PVC-tube in the wings?
>Date: Sun, 12 Feb 2006 15:06:14 +0100 (CET)
>
>Hi builders!
>
>Thanks for the inputs on the flap hinge! I'll go for the split-pin metod 
>then!
>
>Another one:
>I'm thinking towards intstalling wires in the wings also, and saw a builder 
>on the net who'd installed a small PVC-tube in the wings.
>It made room for several wires (landing light, posn light, antenna etc)
>
>Anyone else have done this?
>It seems to me like a good idea??
>Specially if I also put a light line in there so I can replace or add thing 
>later.
>
>Thoughts anyone??
>
>Best regards Alf Olav Frog / Norway