Today's Message Index:
----------------------
1. 07:30 AM - Re: tool recommendations? ()
Message 1
| INDEX | Back to Main INDEX |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: tool recommendations? |
--> RV7-List message posted by: <wlull@cox.net>
Don,
I bought one from Sears (torque wrench) and then had it calibrated to insure it
was accurate. I had my Aircraft Maint shop send it in as they have theirs calibrated
every year. If they don't pass calibration they are junk. Sounds like
yours may be.
Bill
RV-7a Fuselage about to tip it.
>
> From: "Don Hall" <dhall@donka.net>
> Date: 2006/04/18 Tue PM 05:19:21 EDT
> To: <rv7-list@matronics.com>
> Subject: RV7-List: tool recommendations?
>
> --> RV7-List message posted by: "Don Hall" <dhall@donka.net>
>
>
> I want to buy a reasonably priced digital protractor\inclinometer and a
> decent torque wrench that can handle inch-pounds.
>
> My current wratcheting torque wrench is perhaps of questionable quality or
> at the very least it is not idiot proof. It is designed to torque as low as
> 25 in-lbs, but it let me strip the heck out of a few bolts on the wings.
> Don't trust the thing now.
>
> Any recommendations?
>
> Thanks!
>
> ******************************************
> Don Hall
> N517DG (registered)
> rv7 fuselage
> http:\\donka.net\rv7project.html
> ******************************************
>
>
>
>
>
>
>
>
>
>
>
>
>
>
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|