----------------------------------------------------------
                           RV7-List Digest Archive
                                      ---
                     Total Messages Posted Sat 04/29/06: 1
           ----------------------------------------------------------
 
 
Today's Message Index:
----------------------
 
     1. 04:49 AM - Re: Tail light  (tadsargent)
 
 
 
________________________________  Message 1  _____________________________________


Time: 04:49:41 AM PST US
From: "tadsargent" <tadsargent@bellsouth.net>
Subject: Re: RV7-List: Tail light

--> RV7-List message posted by: "tadsargent" <tadsargent@bellsouth.net>

Frank I went the east route.  I replaced the nuts and bolts with stainless
screws.  Just screw them in and fly.
Tad
N130TS
----- Original Message ----- 
From: "Hinde, Frank George (Corvallis)" <frank.hinde@hp.com>
Sent: Friday, April 28, 2006 1:27 PM
Subject: RV7-List: Tail light


> --> RV7-List message posted by: "Hinde, Frank George (Corvallis)"
<frank.hinde@hp.com>
>
>  Hi guys,
>
> Just finishing up the details on the RV7a and wondered what methods you
> all used to fix the nut in the fiberglass rudder bottom to hold the
> tail/strobe light on.
>
> These are pretty small...like #4 screws (that look too short) is that
> correct?
>
> Thanks
>
> frank
>
>