Today's Message Index:
----------------------
1. 03:21 PM - Drawing inconsistencies in Midsection of RV7 (Okrent3209@aol.com)
Message 1
| INDEX | Back to Main INDEX |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Drawing inconsistencies in Midsection of RV7 |
Charlie,
I agree with you on the wiki idea. I've come across similar problems over
the past 4 years of building very slowly. One thing that really bugs me is
that my manual says to cut a 1-5/8 hole in the F725 for the step (I'm building
a
7A) and the drawing shows a 1-1/2" hole. The step tube is 1-1/2". It also
shows that the F623 needs to be cut to avoid interference. But no indication
of what orientation the steps will have at that point? The fuselage curves
back right at that point where the step seems to attach.
In addition, F767 has no hole sizes. I called Vans and they said the
drawing was to scale so that was the size of the holes!
Mike Okrent
RV7A Fuselage
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|