Today's Message Index:
----------------------
1. 10:45 PM - Re: Where to Mount Gretz Mount (Don Hall)
Message 1
INDEX | Back to Main INDEX |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Where to Mount Gretz Mount |
http://donka.net/gallery/view_album.php?set_albumName=rv7leftwing
<http://donka.net/gallery/view_album.php?set_albumName=rv7leftwing&page=3>
&page=3
I installed the gretz heated pitot. Works great on the ground. I took a
decent number of pics, scattered throughout this gallery starting on about
page 3.
Hope this helps.
******************************************
Don Hall
N517DG (registered)
rv7 fuselage
http://rv7.donka.net <http://rv7.donka.net/>
******************************************
_____
From: owner-rv7-list-server@matronics.com
[mailto:owner-rv7-list-server@matronics.com] On Behalf Of
Wndwlkr1228@aol.com
Sent: Sunday, January 21, 2007 11:22 PM
Subject: Re: RV7-List: Where to Mount Gretz Mount
Scott,
I am building an RV-6A (slow build) and am also using the Gretz heated
Pitot/Static probe. I located mine outboard of the tie-down in the right
wing. I routed the tubing in front of the spar until I got to the probe
location. There are lightening holes in the spar at that location so it was
easy to drop the lines behind the spar to the probe.
George
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|