---------------------------------------------------------- RV7-List Digest Archive --- Total Messages Posted Sat 06/28/08: 1 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 05:35 AM - Re: Superior forward facing sump on an RV-7A (Duncan Engh) ________________________________ Message 1 _____________________________________ Time: 05:35:22 AM PST US From: Duncan Engh Subject: Re: RV7-List: Superior forward facing sump on an RV-7A Thanks from Red Wing,Minnesota Duncan 7A --- On Fri, 6/27/08, Greg Blakey wrote: From: Greg Blakey Subject: Re: RV7-List: Superior forward facing sump on an RV-7A Gents, - One thing you might like to consider rather than going to the expense of a whole new cable are these threaded connectors from Aircraft Spruce.-- D an Checkaway used one and I have purchased for my M1B setup to an Aerosance Throttle Body. - Here is the link if anyone is interested and by just choosing the additiona l length you require, you can thread this to the end of your existing cable .. - http://www.aircraftspruce.com/search/search.php?query=10376&searchsubmit =Search&search=1 - Cheers from Down Under! - Greg(RV-7........wiring) - ----- Original Message ----- From: Duncan Engh Sent: Friday, June 27, 2008 10:08 PM Subject: Re: RV7-List: Superior forward facing sump on an RV-7A Please forward the address for ACS Thank you Duncan Engh --- On Fri, 6/27/08, Andrew Phillips wrote: From: Andrew Phillips Subject: Re: RV7-List: Superior forward facing sump on an RV-7A Jason, I had the same problem but the new exhaust fixed it. I have a quick drain and it goes out a hole on the pilots -side of the sump not out the bottom. The cables that Van's sold were too short for me and so I am gettin g ACS to make longer ones. This will depend on what fuel injection system y ou are using. I have the Airflow Performance unit. I made my own throttle/m ix bracket. I will try to remember to take a pic the next time I am at the airport. If you don't get one by the end of the weekend send me a reminder. Andrew Phillips On 26-Jun-08, at 5:12 PM, jkrowe.1@netzero.net wrote: I recently mounted my engine on my RV-7A and found that I had a couple of p roblems.- I have the forward facing Superior sump, the new non-Ryton one, and found that it interfered with my drain plug and came very close to the number one intake lead/runner.- After talking to Vettermans, they said t hat the M1B-exhaust that Vans had sent me-would not work.- The new fo rward facing sump has the same basic architecture as the Ryton sump and fro m what I understand, Vans was somewhat confused about this and sent the MIB .- So I am exhanging the MIB exhaust with the Superior exhaust from Van's to correct the problem.- I was wanting to know if anyone out there has a Superior forward facing sum p with a Vettermans crossover exhaust on a 7A installed that would be willi ng to send a couple of pictures of their installation?- Particularly the area around the drain plug, the area between the number one intake and exha ust leads/runners, and then how the brackets for the throttle and mixture w ere mounted.- Also, what length cables were used for the throttle and mix ture?- I would appreciate any help and advice. Jason N338JR (Reserved) ____________________________________________________________ Fabulous Spa Getaway! Enter for your chance to WIN great beauty prizes everyday! href="http://www.matronics.com/Navigator?RV7-List">http://www.matronics.c om/Navigator?RV7-List href="http://forums.matronics.com">http://forums.matronics.com href="http://www.matronics.com/contribution">http://www.matronics.com/con tribution 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= 3D href='3D"http://www.matronics.com/Navigator?RV7-List"'>http://www.matroni cs.com/Navigator?RV7-List 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= 3D href='3D"http://forums.matronics.com"'>http://forums.matronics.com 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= 3D href='3D"http://www.matronics.com/contribution"'>http://www.matronics.com /contribution 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= 3D =0A=0A=0A ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message rv7-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/RV7-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/rv7-list Browse Digests http://www.matronics.com/digest/rv7-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.