Today's Message Index:
----------------------
1. 07:21 PM - Double Sided Tape used to bend Trim Tab ends (Garey Wittich)
2. 07:44 PM - RV7 (Russell Bell)
3. 08:44 PM - Re: RV7 (Ian Pentney)
4. 08:48 PM - Re: Double Sided Tape used to bend Trim Tab ends (Don Vs)
Message 1
| INDEX | Back to Main INDEX |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Double Sided Tape used to bend Trim Tab ends |
Greetings:
The only Double Sided Tape I could find at the hardware store was Scotch Brand
Double sided tape - looks like regular Scotch tape used on paper, except it is
sticky on BOTH sides. It seems that this tape might be a little to fragile to
help hold the wood forming blocks from moving the Trim Tab Skin, while bending
the Tabs. Have not tried it yet = trying to minimize my mistakes.
Any suggestions: What TAPE did you use and where did you buy it ???
Thanks, Garey
Message 2
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
Hi I am looking for an rv7 kit that has been started for a shorter
build for me will pay good money so if you know of any reply kind
regards Russ
Message 3
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
Hi=0AI have an RV7 QB.=0AI have bought the wing kit, fuse kit, firewall for
ward kit and finish kit.=0AI was planning to use the Sam James cowl so I do
n't have the Vans cowl. =0AYou would have to buy-an engine a-prop and t
he cowl. Everything else is here. -=0ASo far I have bought =0Aone SL30,
=0Aone GRT HS, =0Aone GRT EIS4000, =0Aone GTX327, =0Aone PMA8000, =0Aone Ap
proach Systems PRO hub and harnesses =0Atwo Garmin 16X, =0ATruTrak ADI II,
=0AGertz heated pitot, wig wags,--=0AO2 bottle and regulator and instal
led, =0Atwo seat heaters, etc etc.=0AThis was going to be an IFR all the be
lls and whistles dream machine but the market forced me to down grade to VF
R fixed pitch=0AWings are done and have been on the fuselage,=0ATail is don
e.=0AThe panel is done. It is cut for one GRT HX and one GRT HS and two SL3
0s but I sent the HX and one of the SL30s back to reduce cost. The Approach
Systems harness is done up for two SL30s and both the HS and the HX EFIS d
isplays and the WX which I also sent back.=0AGear-canopy and engine mount
are here but not started.=0AWithout breaking out the tools and all extras
I have spent $73K so far. If you are interested I will break out what ever
you don't want-like tools etc and send you an accurate spread sheet of wh
at I paid for what you would get. =0AI have lots of pictures=0AI am in Thun
der Bay Ontario which may or may not be a problem for you. =0AIan =0APhone
888-254-3935=0A=0A=0A=0A=0A=0A________________________________=0AFrom: Russ
ell Bell <rbe21716@bigpond.net.au>=0ATo: rv7-list@matronics.com=0ASent: Fri
day, January 2, 2009 10:42:53 PM=0ASubject: RV7-List: RV7=0A=0A=0AHi I am l
ooking for an rv7 kit that has been started- for a shorter build for me w
==============0A=0A=0A _____________________
_____________________________________________=0AYahoo! Canada Toolbar: Sear
ch from anywhere on the web, and bookmark your favourite sites. Download it
Message 4
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Double Sided Tape used to bend Trim Tab ends |
I used double sided carpet tape that I got at Lowes. Home Depot also sell
it. It workes fine.
-----Original Message-----
From: owner-rv7-list-server@matronics.com
[mailto:owner-rv7-list-server@matronics.com]On Behalf Of Garey Wittich
Sent: Friday, January 02, 2009 7:20 PM
Subject: RV7-List: Double Sided Tape used to bend Trim Tab ends
Greetings:
The only Double Sided Tape I could find at the hardware store was Scotch
Brand Double sided tape - looks like regular Scotch tape used on paper,
except it is sticky on BOTH sides. It seems that this tape might be a
little to fragile to help hold the wood forming blocks from moving the Trim
Tab Skin, while bending the Tabs. Have not tried it yet = trying to
minimize my mistakes.
Any suggestions: What TAPE did you use and where did you buy it ???
Thanks, Garey
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|