---------------------------------------------------------- RV7-List Digest Archive --- Total Messages Posted Fri 01/02/09: 4 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 07:21 PM - Double Sided Tape used to bend Trim Tab ends (Garey Wittich) 2. 07:44 PM - RV7 (Russell Bell) 3. 08:44 PM - Re: RV7 (Ian Pentney) 4. 08:48 PM - Re: Double Sided Tape used to bend Trim Tab ends (Don Vs) ________________________________ Message 1 _____________________________________ Time: 07:21:07 PM PST US From: Garey Wittich Subject: RV7-List: Double Sided Tape used to bend Trim Tab ends Greetings: The only Double Sided Tape I could find at the hardware store was Scotch Brand Double sided tape - looks like regular Scotch tape used on paper, except it is sticky on BOTH sides. It seems that this tape might be a little to fragile to help hold the wood forming blocks from moving the Trim Tab Skin, while bending the Tabs. Have not tried it yet = trying to minimize my mistakes. Any suggestions: What TAPE did you use and where did you buy it ??? Thanks, Garey ________________________________ Message 2 _____________________________________ Time: 07:44:26 PM PST US From: "Russell Bell" Subject: RV7-List: RV7 Hi I am looking for an rv7 kit that has been started for a shorter build for me will pay good money so if you know of any reply kind regards Russ ________________________________ Message 3 _____________________________________ Time: 08:44:24 PM PST US From: Ian Pentney Subject: Re: RV7-List: RV7 Hi=0AI have an RV7 QB.=0AI have bought the wing kit, fuse kit, firewall for ward kit and finish kit.=0AI was planning to use the Sam James cowl so I do n't have the Vans cowl. =0AYou would have to buy-an engine a-prop and t he cowl. Everything else is here. -=0ASo far I have bought =0Aone SL30, =0Aone GRT HS, =0Aone GRT EIS4000, =0Aone GTX327, =0Aone PMA8000, =0Aone Ap proach Systems PRO hub and harnesses =0Atwo Garmin 16X, =0ATruTrak ADI II, =0AGertz heated pitot, wig wags,--=0AO2 bottle and regulator and instal led, =0Atwo seat heaters, etc etc.=0AThis was going to be an IFR all the be lls and whistles dream machine but the market forced me to down grade to VF R fixed pitch=0AWings are done and have been on the fuselage,=0ATail is don e.=0AThe panel is done. It is cut for one GRT HX and one GRT HS and two SL3 0s but I sent the HX and one of the SL30s back to reduce cost. The Approach Systems harness is done up for two SL30s and both the HS and the HX EFIS d isplays and the WX which I also sent back.=0AGear-canopy and engine mount are here but not started.=0AWithout breaking out the tools and all extras I have spent $73K so far. If you are interested I will break out what ever you don't want-like tools etc and send you an accurate spread sheet of wh at I paid for what you would get. =0AI have lots of pictures=0AI am in Thun der Bay Ontario which may or may not be a problem for you. =0AIan =0APhone 888-254-3935=0A=0A=0A=0A=0A=0A________________________________=0AFrom: Russ ell Bell =0ATo: rv7-list@matronics.com=0ASent: Fri day, January 2, 2009 10:42:53 PM=0ASubject: RV7-List: RV7=0A=0A=0AHi I am l ooking for an rv7 kit that has been started- for a shorter build for me w ==============0A=0A=0A _____________________ _____________________________________________=0AYahoo! Canada Toolbar: Sear ch from anywhere on the web, and bookmark your favourite sites. Download it ________________________________ Message 4 _____________________________________ Time: 08:48:25 PM PST US From: "Don Vs" Subject: RE: RV7-List: Double Sided Tape used to bend Trim Tab ends I used double sided carpet tape that I got at Lowes. Home Depot also sell it. It workes fine. -----Original Message----- From: owner-rv7-list-server@matronics.com [mailto:owner-rv7-list-server@matronics.com]On Behalf Of Garey Wittich Sent: Friday, January 02, 2009 7:20 PM Subject: RV7-List: Double Sided Tape used to bend Trim Tab ends Greetings: The only Double Sided Tape I could find at the hardware store was Scotch Brand Double sided tape - looks like regular Scotch tape used on paper, except it is sticky on BOTH sides. It seems that this tape might be a little to fragile to help hold the wood forming blocks from moving the Trim Tab Skin, while bending the Tabs. Have not tried it yet = trying to minimize my mistakes. Any suggestions: What TAPE did you use and where did you buy it ??? Thanks, Garey ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message rv7-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/RV7-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/rv7-list Browse Digests http://www.matronics.com/digest/rv7-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.