Today's Message Index:
----------------------
1. 12:55 PM - Re: Measure RUDDER Deflection (Swing) Angle (Phil Birkelbach)
Message 1
| INDEX | Back to Main INDEX |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Measure RUDDER Deflection (Swing) Angle |
You can hang a couple of plumb bobs from the rudder and trace the
movement on the floor. Hang one from the trailing edge and the other
from the bottom hinge.
Phil Birkelbach
Houston RV7 - 727WB
phil@petrasoft.net
http://www.myrv7.com/
On Jun 21, 2009, at 10:51 PM, Garey Wittich wrote:
> Greetings:
>
> Have my VS mounted to the work bench along with the Rudder
> attached. Trying to verify the 35 degree travel on the Rudder to
> the Left and Right of Neutral. Seen no Archieves on how to measure
> the angle other than laying the VS and Rudder on the work bench and
> using "Smart Level" to measure the deflection in the Up & Down
> positions. Must be "super simple" to measure it, but for some
> reason the method is not evident to me (now).
>
> Appreciate your help, Garey Wittich Santa Monica, CA
>
>
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|