Today's Message Index:
----------------------
1. 01:00 PM - Woodward vs McCauley Governor Height (Matt Dralle)
2. 09:01 PM - CB-1002-H Governor Bracket Installation Photos...? (Matt Dralle)
3. 10:26 PM - Re: CB-1002-H Governor Bracket Installation Photos...? (wgill10@comcast.net)
Message 1
| INDEX | Back to Main INDEX |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Woodward vs McCauley Governor Height |
Does anybody know if the Woodward governor is shorter than the McCauley governor?
I've got a McCauley on my IO-390 and was doing the left front floor baffle
last night and with the cutout for the governor, there isn't enough room for
the big, square fiberglass intake hole between the governor and the left sidewall.
Its something like 1/4" to 1/2" too narrow and that *doesn't* take into
account any mounting flange space. I'm wondering if the Woodward governor is
shorter by a 1/2" or so which will make this all work. Basically, I don't see
how I'm going to get the McCauley to work at this point.
Anybody have any height specs on the Woodward governor? Basically from the boss
mount to the top of the arm would be helpful.
Thanks!
Matt Dralle
RV-8 #82880 N998RV
http://www.mattsrv8.com - Matt's RV-8 Construction Blog
Message 2
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | CB-1002-H Governor Bracket Installation Photos...? |
Dear Listers,
Van's turned me on to a bracket for the RV-10 called the CB-1002-H which is a bracket
for mounting the governor control cable on front mounted governors.
Does anyone have some good pictures of how this bracket is installed? Maybe even
a scan of the baffling installation OP sheet where the RV-10 baffling is described?
Since the IO-390 has a front mounted governor similar to the IO-540 used on the
RV-10, some of these baffling pieces seem to work.
Any docs you could provide would be most appreciated!
Matt Dralle
RV-8 #82880 N998RV
http://www.mattsrv8.com - Matt's RV-8 Construction Blog
Engine Baffling...
Message 3
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: CB-1002-H Governor Bracket Installation Photos...? |
Hello Matt,
I didn't use this bracket...made my own. If interested, Go to Marc's site (
www.IO-390.com ) and see what I did for the governor bracket and front baf
fles for the front mounted governor pad. Additionally, I could send some hi
gher resolution pictures...just let me know.=C2-I have NEVER had any high
temp issues...a very fast airplane as well.
FAB Air box:=C2-=C2-=C2- http://www.io-390.com/IO-390.com/AFP_Servo.h
tml
Prop Gov Cable/bracket:=C2-=C2-=C2- http://www.io-390.com/IO-390.com/
Prop_Gov.html
Baffles:=C2-=C2-=C2- http://www.io-390.com/IO-390.com/Baffles_2.html
Good luck,
Bill
RV-7 N151WP
BPE IO-390 w/AFP=C2-
----- Original Message -----
From: "Matt Dralle" <dralle@matronics.com>
rv7-list@matronics.com
Sent: Friday, September 18, 2009 10:57:48 PM GMT -06:00 US/Canada Central
Subject: RV7-List: CB-1002-H Governor Bracket Installation Photos...?
Dear Listers,
Van's turned me on to a bracket for the RV-10 called the CB-1002-H which is
a bracket for mounting the governor control cable on front mounted governo
rs.
Does anyone have some good pictures of how this bracket is installed? =C2
-Maybe even a scan of the baffling installation OP sheet where the RV-10
baffling is described?
Since the IO-390 has a front mounted governor similar to the IO-540 used on
the RV-10, some of these baffling pieces seem to work.
Any docs you could provide would be most appreciated!
Matt Dralle
RV-8 #82880 N998RV
http://www.mattsrv8.com - Matt's RV-8 Construction Blog
Engine Baffling...
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|