Today's Message Index:
----------------------
 
     1. 12:03 PM - Re: master swithch (eddies)
     2. 02:47 PM - Tach readout for Lightspeed on Dynon D-10 (Herb Feldman)
 
 
 

Message 1


					INDEX
 Back to Main INDEX
					NEXT
 Skip to NEXT Message
	LIST
 Reply to LIST Regarding this Message
		SENDER
 Reply to SENDER Regarding this Message

      
      
Time: 
12:03:32 PM PST US
Subject: 
Re: master swithch
From: 
"eddies" <eddie.seve@clarity.com>
      
      
      Hi Ray,
      
      I installed a separate master switch to activate the master relay and wired the
      PP alternator field to a separate switch with a light to indicate a failure mode.
      
      The P leads on the Mags are just switched to ground as a function of the key switch
      for off or open circuit for on.
      
      Cheers
      Eddie
      
      
      Read this topic online here:
      
      http://forums.matronics.com/viewtopic.php?p=367883#367883
      
      

Message 2


					INDEX
 Back to Main INDEX
				PREVIOUS
 Skip to PREVIOUS Message
					NEXT
 Skip to NEXT Message
	LIST
 Reply to LIST Regarding this Message
		SENDER
 Reply to SENDER Regarding this Message

      
      
Time: 
02:47:27 PM PST US
From: 
Herb Feldman <hfaz@yahoo.com>
Subject: 
Tach readout for Lightspeed on Dynon D-10
      
      Hi all - Has anyone gotten their Dynon D-10 to read out the tach-rpm for 
      a Lightspeed Plasma II Plus.- The light speed is wired as per the instruc
      tion, Input plug, with pin 6 for the signal and pin 13 to ground.- I have
       a Mag on the left and the Lightspeed on the right.- While doing a Mag ch
      eck, the Dynon-displays the Mag rpm fine but the readout drops to-0 whe
      n I switch to the Lightspeed. 
      Dynon says they need a minimum 10 volt signal, and Light speed puts out 10 
      volts.- I guess the voltages don't quite match. When switched to both, th
      e Dynon reads the only one working, which is the Mag.
      Other than the readout problem, the Lightspeed works fine.
      Anyone have a fix for getting the Dynon to display the Lightspeed?
      Thanks - Herb
      








Other Matronics Email List Services




Post A New Message
  
rv7-list@matronics.com
UN/SUBSCRIBE
  
http://www.matronics.com/subscription
List FAQ
  
http://www.matronics.com/FAQ/RV7-List.htm
Web Forum Interface To Lists
  
http://forums.matronics.com
Matronics List Wiki
  
http://wiki.matronics.com
7-Day List Browse
  
http://www.matronics.com/browse/rv7-list
Browse RV7-List Digests
  
http://www.matronics.com/digest/rv7-list
Browse Other Lists
  
http://www.matronics.com/browse
Live Online Chat!
  
http://www.matronics.com/chat
Archive Downloading
  
http://www.matronics.com/archives
Photo Share
  
http://www.matronics.com/photoshare
Other Email Lists
  
http://www.matronics.com/emaillists
Contributions
  
http://www.matronics.com/contribution









These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.




-- Please support this service by making your Contribution today! --