Today's Message Index:
----------------------
1. 12:59 PM - Re: Jigs (Lloyd)
2. 03:00 PM - Re: Jigs (Donald L. Erickson)
Message 1
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | E: RV8-List:Jigs |
--> RV8-List message posted by: Lloyd <tlloyd6250@comcast.net>
Just read your instructions. There are no jigs required.
-----Original Message-----
From: owner-rv8-list-server@matronics.com
[mailto:owner-rv8-list-server@matronics.com]On Behalf Of
LitewoodsJoinery@aol.com
Subject: Re: RV8-List:Jigs
--> RV8-List message posted by: LitewoodsJoinery@aol.com
Hi All.
Well,just received my empanage kit for the RV 8
I am trying to find out about the jig and future jigs which I will need.
Do any of you out there know if there are plans available,or at least
dimensions which should be used.
As you can all imagine,I am very excited about starting,but really want to
get everything ready for construction before I start.
Thank you in advance for any help.
You can be sure that there will be many more questions :)
I would also like to thank those of you who kindly helped me out with the
wiring for my Microair 760....
Mike.
Message 2
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: e: RV8-List:Jigs |
--> RV8-List message posted by: "Donald L. Erickson" <dle@joplin.com>
With prepunched holes jigs not needed but you might build the wing jig and
modify it to hold Horizontal Stabilizer during fabrication. Don
----- Original Message -----
From: "Lloyd" <tlloyd6250@comcast.net>
Subject: RE: RV8-List:Jigs
> --> RV8-List message posted by: Lloyd <tlloyd6250@comcast.net>
>
> Just read your instructions. There are no jigs required.
>
> -----Original Message-----
> From: owner-rv8-list-server@matronics.com
> [mailto:owner-rv8-list-server@matronics.com]On Behalf Of
> LitewoodsJoinery@aol.com
> To: rv8-list@matronics.com
> Subject: Re: RV8-List:Jigs
>
>
> --> RV8-List message posted by: LitewoodsJoinery@aol.com
>
> Hi All.
> Well,just received my empanage kit for the RV 8
> I am trying to find out about the jig and future jigs which I will need.
> Do any of you out there know if there are plans available,or at least
> dimensions which should be used.
> As you can all imagine,I am very excited about starting,but really want to
> get everything ready for construction before I start.
> Thank you in advance for any help.
> You can be sure that there will be many more questions :)
> I would also like to thank those of you who kindly helped me out with the
> wiring for my Microair 760....
>
> Mike.
>
>
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|