---------------------------------------------------------- RV8-List Digest Archive --- Total Messages Posted Thu 05/08/03: 2 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 12:59 PM - Re: Jigs (Lloyd) 2. 03:00 PM - Re: Jigs (Donald L. Erickson) ________________________________ Message 1 _____________________________________ Time: 12:59:16 PM PST US From: Lloyd Subject: RE: RV8-List:Jigs --> RV8-List message posted by: Lloyd Just read your instructions. There are no jigs required. -----Original Message----- From: owner-rv8-list-server@matronics.com [mailto:owner-rv8-list-server@matronics.com]On Behalf Of LitewoodsJoinery@aol.com Subject: Re: RV8-List:Jigs --> RV8-List message posted by: LitewoodsJoinery@aol.com Hi All. Well,just received my empanage kit for the RV 8 I am trying to find out about the jig and future jigs which I will need. Do any of you out there know if there are plans available,or at least dimensions which should be used. As you can all imagine,I am very excited about starting,but really want to get everything ready for construction before I start. Thank you in advance for any help. You can be sure that there will be many more questions :) I would also like to thank those of you who kindly helped me out with the wiring for my Microair 760.... Mike. ________________________________ Message 2 _____________________________________ Time: 03:00:30 PM PST US From: "Donald L. Erickson" Subject: Re: RV8-List:Jigs --> RV8-List message posted by: "Donald L. Erickson" With prepunched holes jigs not needed but you might build the wing jig and modify it to hold Horizontal Stabilizer during fabrication. Don ----- Original Message ----- From: "Lloyd" Subject: RE: RV8-List:Jigs > --> RV8-List message posted by: Lloyd > > Just read your instructions. There are no jigs required. > > -----Original Message----- > From: owner-rv8-list-server@matronics.com > [mailto:owner-rv8-list-server@matronics.com]On Behalf Of > LitewoodsJoinery@aol.com > To: rv8-list@matronics.com > Subject: Re: RV8-List:Jigs > > > --> RV8-List message posted by: LitewoodsJoinery@aol.com > > Hi All. > Well,just received my empanage kit for the RV 8 > I am trying to find out about the jig and future jigs which I will need. > Do any of you out there know if there are plans available,or at least > dimensions which should be used. > As you can all imagine,I am very excited about starting,but really want to > get everything ready for construction before I start. > Thank you in advance for any help. > You can be sure that there will be many more questions :) > I would also like to thank those of you who kindly helped me out with the > wiring for my Microair 760.... > > Mike. > >