---------------------------------------------------------- RV8-List Digest Archive --- Total Messages Posted Thu 07/24/03: 3 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 12:38 PM - Riveting the HS Skin to the HS607 Tip Rib (Garey Wittich) 2. 05:05 PM - Lycoming O-320 in RV-8? (Eric Parlow) 3. 10:53 PM - Re: Lycoming O-320 in RV-8? (Jolly) ________________________________ Message 1 _____________________________________ Time: 12:38:25 PM PST US From: Garey Wittich Subject: RV8-List: Riveting the HS Skin to the HS607 Tip Rib --> RV8-List message posted by: Garey Wittich Any helpful suggestions on how to hold the Horizontal Stabilizer Skin flat against the flange of the HS607 Tip Rib, when riveting the rivet closest to the leading edge ? When looking down the interior of the leading edge of the skin there is a slight air gap (approx1/16") between the skin and the flange of the HS607. Garey Wittich Santa Monica, Calif (310) 392-1682 --------------------------------- Free online calendar with sync to Outlook(TM). ________________________________ Message 2 _____________________________________ Time: 05:05:49 PM PST US From: "Eric Parlow" Subject: RV8-List: Lycoming O-320 in RV-8? --> RV8-List message posted by: "Eric Parlow" Is anyone aware of a Lyc O-320 powerd RV-8(A) ________________________________ Message 3 _____________________________________ Time: 10:53:00 PM PST US From: "Jolly" Subject: Re: RV8-List: Lycoming O-320 in RV-8? --> RV8-List message posted by: "Jolly" I have one with a c/s prop.. ----- Original Message ----- From: "Eric Parlow" Subject: RV8-List: Lycoming O-320 in RV-8? > --> RV8-List message posted by: "Eric Parlow" > > Is anyone aware of a Lyc O-320 powerd RV-8(A) > > > > >