Today's Message Index:
----------------------
1. 05:59 PM - Re: Autopilot servo mounting RV-8 (richard martin)
2. 06:26 PM - Re: Autopilot servo mounting RV-8 (Garrison Sem)
Message 1
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Autopilot servo mounting RV-8 |
--> RV8-List message posted by: "richard martin" <martin333@athenet.net>
>--> RV8-List message posted by: "Ken Simmons" <ken@truckstop.com>
>
>I'm about to the point of closing my wings (RV-8) and was wondering about autopilot
servos.
>
>>From the research I've done the Trutrak is the only one that mounts the roll
servo in the fuselage. When I asked Blue Mountain the answer was talk to someone
who has already done it. Not much help.
>
>Any other possiblities for fuselage mounting or do I need to make the decision
now?
>
>Thanks.
>
>Ken
>
Dear Ken,
I did all of the prototype work for TruTraks in my RV8. You may install the
roll servo in either the fuselage just aft of the forward control stick or in
the wing at the aeleron bellcrank bracket. All you need do is specify which
installation you prefer, and the proper brackets will be supplied. If you
have any further questions please call me at 920 619 6968 and I will advise.
I do not always look at the internet so email replys may be slow.
Dick Martin
RV8 N233M
the fast one
>
>
>
>
>
>
>
Message 2
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Autopilot servo mounting RV-8 |
--> RV8-List message posted by: "Garrison Sem" <chasm711@msn.com>
The STEC roll and pitch servos both mount in the fuselage. Pitch aft of the
second former on a shelf and roll just aft of the roll torque tube on the
right center section rib.
Paul Schattauer
RV 8 N808PS
wireing
>From: "richard martin" <martin333@athenet.net>
>Reply-To: rv8-list@matronics.com
>To: rv8-list@matronics.com
>Subject: Re: RV8-List: Autopilot servo mounting RV-8
>Date: Sun, 19 Oct 2003 19:56:25 -0500
>
>--> RV8-List message posted by: "richard martin" <martin333@athenet.net>
>
> >--> RV8-List message posted by: "Ken Simmons" <ken@truckstop.com>
> >
> >I'm about to the point of closing my wings (RV-8) and was wondering about
>autopilot
>servos.
> >
> >>From the research I've done the Trutrak is the only one that mounts the
>roll
>servo in the fuselage. When I asked Blue Mountain the answer was talk to
>someone
>who has already done it. Not much help.
> >
> >Any other possiblities for fuselage mounting or do I need to make the
>decision
>now?
> >
> >Thanks.
> >
> >Ken
> >
>Dear Ken,
>I did all of the prototype work for TruTraks in my RV8. You may install
>the
>roll servo in either the fuselage just aft of the forward control stick or
>in
>the wing at the aeleron bellcrank bracket. All you need do is specify
>which
>installation you prefer, and the proper brackets will be supplied. If you
>have any further questions please call me at 920 619 6968 and I will
>advise.
> I do not always look at the internet so email replys may be slow.
>
>Dick Martin
>RV8 N233M
>the fast one
> >
> >
> >
> >
> >
>
>
> >
> >
>
>
Enjoy MSN 8 patented spam control and more with MSN 8 Dial-up Internet
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|