----------------------------------------------------------
                           RV8-List Digest Archive
                                      ---
                     Total Messages Posted Mon 05/24/04: 2
           ----------------------------------------------------------
 
 
Today's Message Index:
----------------------
 
     1. 05:09 AM - Re: Elevator Electric Trim Wiring Routing  (Doug Ripley)
     2. 10:54 AM - Re: Elevator Electric Trim Wiring Routing  (Al Grajek)
 
 
 
________________________________  Message 1  _____________________________________


Time: 05:09:27 AM PST US
From: "Doug Ripley" <dougr@hurricanefilter.com>
Subject: Re: RV8-List: Elevator Electric Trim Wiring Routing

--> RV8-List message posted by: "Doug Ripley" <dougr@hurricanefilter.com>

I haven't ran mine yet, but plan to put them through grommets in the holes
in the elevator spar and aft stab spar that were intended for the mechanical
trim.
Doug Ripley
N821DT
painting....may fly in June!!


----- Original Message -----
From: "Sally and George" <aeronut58@hotmail.com>
Subject: RV8-List: Elevator Electric Trim Wiring Routing


> --> RV8-List message posted by: "Sally and George" <aeronut58@hotmail.com>
>
> Where should the wiring from the MAC servo be routed from the left
elevator?
>   The drawings leave this unspecified.
>
> I'm inclined to run them out through the inboard elevator rib to the
control
> horn, thence (with a lot of slack) to the fuselage.
>
> What have others done?
>
> George Kilishek
>
> Watch LIVE baseball games on your computer with MLB.TV, included with MSN
> Premium! http://join.msn.click-url.com/go/onm00200439ave/direct/01/
>
>






________________________________  Message 2  _____________________________________


Time: 10:54:10 AM PST US
From: "Al Grajek" <algrajek@msn.com>
Subject: RE: RV8-List: Elevator Electric Trim Wiring Routing

--> RV8-List message posted by: "Al Grajek" <algrajek@msn.com>

I just ran mine through the holes that are ther for the manual trim cable, 
then alont the longeron all the way to the panel. Works great wit 10 hours 
on the airplane. Do not label trim indicator until you are sure which way 
thw wires are hooked up .
Al Grajek
RV8A
Finally flying!


>From: "Sally and George" <aeronut58@hotmail.com>
>Reply-To: rv8-list@matronics.com
>To: rv8-list@matronics.com
>Subject: RV8-List: Elevator Electric Trim Wiring Routing
>Date: Sun, 23 May 2004 18:01:01 -0500
>
>--> RV8-List message posted by: "Sally and George" <aeronut58@hotmail.com>
>
>Where should the wiring from the MAC servo be routed from the left 
>elevator?
>   The drawings leave this unspecified.
>
>I'm inclined to run them out through the inboard elevator rib to the 
>control
>horn, thence (with a lot of slack) to the fuselage.
>
>What have others done?
>
>George Kilishek
>
>Watch LIVE baseball games on your computer with MLB.TV, included with MSN
>Premium! http://join.msn.click-url.com/go/onm00200439ave/direct/01/
>
>