----------------------------------------------------------
                           RV8-List Digest Archive
                                      ---
                     Total Messages Posted Mon 08/23/04: 2
           ----------------------------------------------------------
 
 
Today's Message Index:
----------------------
 
     1. 04:56 AM - Re: RV 8A toe in  (Dale Mitchell)
     2. 05:14 PM - Re: RV8-List Digest: 1 Msgs - 08/22/04  (Sally and George)
 
 
 
________________________________  Message 1  _____________________________________


Time: 04:56:27 AM PST US
From: Dale Mitchell <dfm4290@yahoo.com>
Subject: Re: RV8-List: RV 8A toe in

--> RV8-List message posted by: Dale Mitchell <dfm4290@yahoo.com>

I would think you would want some toe in.
As more weight is put on them they will tend to toe
out.
Just my opinion.
Dale Mitchell RV-8A


--- Mark Rose <av8er2@McLeodusa.net> wrote:

> --> RV8-List message posted by: "Mark Rose"
> <av8er2@mcleodusa.net>
> 
>   I'm new to messaging on the list but here go,s.
> How do you correct the toe in on the 8A? I have
> about 3/16s from a straight edge, don't know if that
> is too much or not.   Thank,s  Mark Rose 137MR
> reserved.             
> 
> 
>
> Contributions
> any other
> Forums.
>
> http://www.matronics.com/chat
>
> http://www.matronics.com/subscription
> http://www.matronics.com/FAQ/RV8-List.htm
> http://www.matronics.com/archives
> http://www.matronics.com/photoshare
> http://www.matronics.com/emaillists
>
> 
> 
> 
> 
> 


                
__________________________________






________________________________  Message 2  _____________________________________


Time: 05:14:42 PM PST US
From: "Sally and George" <aeronut58@hotmail.com>
Subject: RV8-List: RE: RV8-List Digest: 1 Msgs - 08/22/04

--> RV8-List message posted by: "Sally and George" <aeronut58@hotmail.com>

Mark:

Go to the Van's catalog.  They have tapered shims that work just fine.

If both mains are parallel to one another but are slightly misaligned with 
the centerline of the aircraft it won't be the end of the world.


George

N888GK flying
kit #80221 wings


>--> RV8-List message posted by: "Mark Rose" <av8er2@mcleodusa.net>
>
>   I'm new to messaging on the list but here go,s. How do you correct the 
>toe in
>on the 8A? I have about 3/16s from a straight edge, don't know if that is 
>too
>much or not.   Thank,s  Mark Rose 137MR reserved.
>
>

http://toolbar.msn.click-url.com/go/onm00200415ave/direct/01/