Today's Message Index:
----------------------
1. 06:08 AM - Re: Re: RV8-List Digest: 1 Msgs - 08/22/04 (Scott Bilinski)
2. 08:26 AM - RVs at KTOA (Eric Parlow)
3. 09:35 AM - Re: RV-List: RVs at KTOA (Skylor Piper)
4. 07:46 PM - Re: RV 8A toe in (Tom Scherder)
Message 1
| INDEX | Back to Main INDEX |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: RE: RV8-List Digest: 1 Msgs - 08/22/04 |
--> RV8-List message posted by: Scott Bilinski <bilinski@kyocera-wireless.com>
Great idea for the tail dragger. No go for the 8a.
At 07:14 PM 8/23/2004 -0500, you wrote:
>--> RV8-List message posted by: "Sally and George" <aeronut58@hotmail.com>
>
>Mark:
>
>Go to the Van's catalog. They have tapered shims that work just fine.
>
>If both mains are parallel to one another but are slightly misaligned with
>the centerline of the aircraft it won't be the end of the world.
>
>
>George
>
>N888GK flying
>kit #80221 wings
>
>
> >--> RV8-List message posted by: "Mark Rose" <av8er2@mcleodusa.net>
> >
> > I'm new to messaging on the list but here go,s. How do you correct the
> >toe in
> >on the 8A? I have about 3/16s from a straight edge, don't know if that is
> >too
> >much or not. Thank,s Mark Rose 137MR reserved.
> >
> >
>
>http://toolbar.msn.click-url.com/go/onm00200415ave/direct/01/
>
>
Scott Bilinski
Eng dept 305
Phone (858) 657-2536
Pager (858) 502-5190
Message 2
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
--> RV8-List message posted by: "Eric Parlow" <ericparlow@hotmail.com>
Looking for info on RVs, more specifically RV-8s, at KTOA.
Or surrounding airports: KSMO, KLGB, KHHR.
I'm considering moving there and RV's / Airports will weigh heavily into my
decision.
ERic--
RV-8 Wings
Message 3
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: RV-List: RVs at KTOA |
--> RV8-List message posted by: Skylor Piper <skylor4@yahoo.com>
Eric,
The RV population at Torrance is growing rapidly.
I'm building an 8 QB with my father, and there is
another flying 8A based there. There are also several
6's and 4's on the field, and at least 1 F1 Rocket
under construction.
Skylor Piper
RV-8 QB Under Construction
N808SJ Reserved
--- Eric Parlow <ericparlow@hotmail.com> wrote:
> --> RV-List message posted by: "Eric Parlow"
> <ericparlow@hotmail.com>
>
> Looking for info on RVs, more specifically RV-8s,
> at KTOA.
>
> Or surrounding airports: KSMO, KLGB, KHHR.
>
> I'm considering moving there and RV's / Airports
> will weigh heavily into my
> decision.
>
> ERic--
> RV-8 Wings
>
>
>
> Contributions
> any other
> Forums.
>
> http://www.matronics.com/chat
>
> http://www.matronics.com/subscription
> http://www.matronics.com/FAQ/RV-List.htm
> http://www.matronics.com/archives
> http://www.matronics.com/photoshare
> http://www.matronics.com/emaillists
>
>
>
>
>
>
_______________________________
Message 4
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: RV 8A toe in |
--> RV8-List message posted by: "Tom Scherder" <tomscherder@hotmail.com>
Mark,
There are shims that you can get to correct any toe in or toe out. Washers
seem to work OK too. A little toe in is a good thing as it helps to keep the
plane going straight. Since we all always make perfect3 pointers when we
land we need to keep the alignment perfect, right? Just watch your tire wear
and it will tell you if your eating tires, Have you ever flown a 172 that
was actually in line? It's always best to get it as close as you can but the
gear will flex and twist as we bounce and twist our way into a perfect
landing. Try not to get eaten up in details. Build it right and it will fly
great.
Tom Scherder
RV 8 N38NE flying
----- Original Message -----
From: "Mark Rose" <av8er2@McLeodusa.net>
Subject: RV8-List: RV 8A toe in
> --> RV8-List message posted by: "Mark Rose" <av8er2@mcleodusa.net>
>
> I'm new to messaging on the list but here go,s. How do you correct the
toe in on the 8A? I have about 3/16s from a straight edge, don't know if
that is too much or not. Thank,s Mark Rose 137MR reserved.
>
>
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|