----------------------------------------------------------
                           RV8-List Digest Archive
                                      ---
                     Total Messages Posted Mon 12/13/04: 2
           ----------------------------------------------------------
 
 
Today's Message Index:
----------------------
 
     1. 01:30 PM - Floor insulation  (PPlous@aol.com)
     2. 02:00 PM - Re: Floor insulation  (Scott Bilinski)
 
 
 
________________________________  Message 1  _____________________________________


Time: 01:30:43 PM PST US
From: PPlous@aol.com
Subject: RV8-List: Floor insulation

--> RV8-List message posted by: PPlous@aol.com

Anyone using any insulation under the 830/831 floor before riveting the  
thing down? If so, what type?

Thanks
P2






________________________________  Message 2  _____________________________________


Time: 02:00:24 PM PST US
From: Scott Bilinski <bilinski@kyocera-wireless.com>
Subject: Re: RV8-List: Floor insulation

--> RV8-List message posted by: Scott Bilinski <bilinski@kyocera-wireless.com>

The best thing to do is to make it air tight so you do not have cold drafts 
blowing through. Block the read spar attach, front spars, also boots on the 
aileron tubes. This will make a bigger difference IMHO.


At 04:30 PM 12/13/2004 -0500, you wrote:
>--> RV8-List message posted by: PPlous@aol.com
>
>Anyone using any insulation under the 830/831 floor before riveting the
>thing down? If so, what type?
>
>Thanks
>P2
>
>


Scott Bilinski
Eng dept 305
Phone (858) 657-2536
Pager (858) 502-5190