Today's Message Index:
----------------------
1. 06:09 AM - Re: Mounting Radios (Joel Harding)
Message 1
| INDEX | Back to Main INDEX |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Mounting Radios |
--> RV8-List message posted by: Joel Harding <cajole76@ispwest.com>
Bob,
One other thing to consider is the space behind the radios. The
traditional mounting leaves minimal space to get to the plugs for
trouble shooting or adding pins at a later date. Moving the radios
further back would only aggravate the situation.
Joel Harding
> On 04/18 3:45, Bob C. wrote:
>
>> --> RV8-List message posted by: "Bob C. " <flyboy.bob@gmail.com>
>>
>> I'm ready to mount my GNS430, Transponder, and Audio Panel.
>>
>> They look like they'll stick out quite a ways . . . looks like it
>> would be nice to set them back in the panel . . . not quite flush . .
>> . what has been the best solution for mounting radio equipment . . .
>> the traditional way or set back into the panel.
>
> Mine stick out (all of them) exactly 3/10th of an inch, just shy
> of the bezel width. It was pretty easy to fabricate the mounts.
> I think it looks ok. I assume that mounting "methods" are similar
> for 8's and 7's, but I could be wrong, don't know much about 8's.
>
> see entry dated 7/3/04
> http://rv7-a.com/avionics.htm
>
> Finished Results
> http://rv7-a.com/Img_5172.jpg
>
> --
> Walter Tondu
> http://www.rv7-a.com
> Ready to move to airport
> Looking for a trailer...
>
>
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|