Today's Message Index:
----------------------
1. 01:36 AM - Fuse bottom skins (Greg@itmack)
Message 1
| INDEX | Back to Main INDEX |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| From: | "Greg@itmack" <greg@itmack.com> |
| Subject: | Fuse bottom skins |
--> RV8-List message posted by: "Greg@itmack" <greg@itmack.com>
Hi all, I always have problems on the weekend. I'm trying to fit the F842 bottom
skin. The instructions say to line up the 2 pre-punched holes at the forward
end of the F842 with pre-punched holes at the aft end of the F826 & F827.
My problem is the holes punched in the F842 are not the same distance apart as
the ones in the F826 & F827. The F826 & F827 line up on the centres of the F806
and F807 and the pre-punched holes of the F804 should keep the F826 & F827
square as well.
Is this a standard problem and one of the holes in the F842 punched wrong or is
this something I've done wrong? With only one hole clecoed and using a tight
string line the F842 sits nicely centred along the fuse.
Greg
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|