---------------------------------------------------------- RV8-List Digest Archive --- Total Messages Posted Sat 04/23/05:1 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 01:36 AM - Fuse bottom skins (Greg@itmack) ________________________________ Message 1 _____________________________________ Time: 01:36:46 AM PST US From: "Greg@itmack" Subject: RV8-List: Fuse bottom skins --> RV8-List message posted by: "Greg@itmack" Hi all, I always have problems on the weekend. I'm trying to fit the F842 bottom skin. The instructions say to line up the 2 pre-punched holes at the forward end of the F842 with pre-punched holes at the aft end of the F826 & F827. My problem is the holes punched in the F842 are not the same distance apart as the ones in the F826 & F827. The F826 & F827 line up on the centres of the F806 and F807 and the pre-punched holes of the F804 should keep the F826 & F827 square as well. Is this a standard problem and one of the holes in the F842 punched wrong or is this something I've done wrong? With only one hole clecoed and using a tight string line the F842 sits nicely centred along the fuse. Greg