---------------------------------------------------------- RV8-List Digest Archive --- Total Messages Posted Mon 06/27/05: 2 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 04:09 AM - Re: Bent stick for rv8 (William Slaughter) 2. 08:23 AM - Bent stick for RV-8 (Bruce Niles) ________________________________ Message 1 _____________________________________ Time: 04:09:39 AM PST US From: "William Slaughter" Subject: RE: RV8-List: Bent stick for rv8 --> RV8-List message posted by: "William Slaughter" Todd (the guy at rvwoody.com) has gotten out of the the business. Your best bet would probably be to try and locate a race car fabrication shop near you that can do the job with their mandrel tubing bender. William Slaughter RV-8 Wings -----Original Message----- From: owner-rv8-list-server@matronics.com [mailto:owner-rv8-list-server@matronics.com] On Behalf Of DONKEYVET@aol.com Subject: Re: RV8-List: Bent stick for rv8 --> RV8-List message posted by: DONKEYVET@aol.com Al, The guy at rvwoody.com only bends sticks when he feels there is a big enough batch. You have to then send him your stick to be bent. He doesn't sell them already bent so if you are already flying it would put you out of comission for a while. Dennis Flosi RV-8 finishing kit ________________________________ Message 2 _____________________________________ Time: 08:23:07 AM PST US From: "Bruce Niles" Subject: RV8-List: Bent stick for RV-8 --> RV8-List message posted by: "Bruce Niles" I'm going to check with a local electrical contractor or plumber. They bend tubing all the time.