---------------------------------------------------------- RV8-List Digest Archive --- Total Messages Posted Thu 07/14/05: 2 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 10:11 AM - List Digest Truncation Fixed!! (Matt Dralle) 2. 09:27 PM - Closing tail dragger RV8 gear boxes. (owner-rv8-list-server@matronics.com) ________________________________ Message 1 _____________________________________ Time: 10:11:19 AM PST US From: Matt Dralle Subject: RV8-List: List Digest Truncation Fixed!! --> RV8-List message posted by: Matt Dralle Dear Listers, I finally figured out today what was causing the occasional truncation of the daily List Digest emails. Seems that every once in a while a message would contain a single "." (period) on line all by itself. The mailers would see this and assume that this was the universal emailer signal for "end of message", and consequently wouldn't process any of the rest of the Digest message. I've put in a filter today to remove any of these sequences so we should be back in business on the Digests. Best regards, Matt Dralle Matronics Email List Admin. Matt G Dralle | Matronics | PO Box 347 | Livermore | CA | 94551 925-606-1001 V | 925-606-6281 F | dralle@matronics.com Email http://www.matronics.com/ WWW | Featuring Products For Aircraft ________________________________ Message 2 _____________________________________ Time: 09:27:50 PM PST US From: owner-rv8-list-server@matronics.com Subject: RV8-List: Closing tail dragger RV8 gear boxes. --> RV8-List message posted by: Guys =96 I am currently building the RV8 tail dragger gear boxes. Closing the gear box, i.e. attaching the cover (802C) onto the sides (802 A & B), calls for AN470 rivets. Once closed, getting inside the gear box is sort of hard. Any of you guys have experience with replacing the rivets with screws (#6 screws should do it) so that the cover could be removable? Thanks, Michele Delsol RV8 - Fuselage