Today's Message Index:
----------------------
1. 10:23 AM - Re: Closing tail dragger RV8 gear boxes. (Bob C.)
2. 06:12 PM - Electrical Tools-Wiring Supplies-Harnesses and More ()
3. 08:00 PM - Re: Closing tail dragger RV8 gear boxes. (Sally and George)
Message 1
INDEX | Back to Main INDEX |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: Closing tail dragger RV8 gear boxes. |
--> RV8-List message posted by: "Bob C. " <flyboy.bob@gmail.com>
Michele,
I've left mine partially open and intend to close them with the appropriate
cherry-max rivets when I'm done in there . . . soon I hope!
Good Luck,
Bob
On 7/14/05, owner-rv8-list-server@matronics.com <
owner-rv8-list-server@matronics.com> wrote:
>
> --> RV8-List message posted by:
>
> Guys 96 I am currently building the RV8 tail dragger gear boxes. Closing
> the
> gear box, i.e. attaching the cover (802C) onto the sides (802 A & B),
> calls
> for AN470 rivets. Once closed, getting inside the gear box is sort of
> hard.
> Any of you guys have experience with replacing the rivets with screws (#6
> screws should do it) so that the cover could be removable?
>
>
> Thanks,
>
> Michele Delsol
>
> RV8 - Fuselage
>
>
Message 2
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Electrical Tools-Wiring Supplies-Harnesses and More |
--> RV8-List message posted by: <fablef@bellsouth.net>
Hi Everyone,
With Matt Dralle's permission, I wanted to let everyone on the list know that Affordable
Panels has added electrical tools, electrical supplies, wiring harnesses
and more to our inventory. We have some of the lowest prices on everything
from tools, terminals, connectors, wire, electroluminescent lighting, etc.
Our wiring harnesses for all Trutrak Autopilots are available in "Standard" and
"Wing Root Disconnect" form, and we also offer harnesses for the Dynon EFIS,
Flightcom and many others at the very best prices.
Our full page catalog will be out in a couple of weeks. In the mean time, anyone
interested can download the electrical portion of our catalog here.
http://www.affordablepanels.com/electrical.htm
All electrical orders placed on-line or faxed with a total above $175.00 will ship
free via UPS GROUND.
Best Regards,
Fabian Lefler
www.affordablepanels.com
Message 3
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Closing tail dragger RV8 gear boxes. |
--> RV8-List message posted by: "Sally and George" <aeronut58@hotmail.com>
Michele:
You're right...it'll be a recurring nuisance getting inside those gear boxes
to, for instance, tighten the nuts holding the landing gear in place, or to
install the vent tubes and fittings.
However, I don't think that the screws will work. You'll soon be bolting
some weldments to the bottom of those gear boxes which will make removal of
the cover impossible.
High points to you for thinking ahead, but I think we just have to live with
these things.
George Kilishek
RV 8 N888GK flying
RV 8 N57GK finishing kit
>From: owner-rv8-list-server@matronics.com
>Reply-To: rv8-list@matronics.com
>To: <rv-list@matronics.com>, <rv8-list@matronics.com>,
><RV-8@yahoogroups.com>
>Subject: RV8-List: Closing tail dragger RV8 gear boxes.
>Date: Fri, 15 Jul 2005 06:25:05 +0200
>
>--> RV8-List message posted by:
>
>Guys =96 I am currently building the RV8 tail dragger gear boxes. Closing
>the
>gear box, i.e. attaching the cover (802C) onto the sides (802 A & B), calls
>for AN470 rivets. Once closed, getting inside the gear box is sort of hard.
>Any of you guys have experience with replacing the rivets with screws (#6
>screws should do it) so that the cover could be removable?
>
>
>Tha
>Michele Delsol
>
>RV8 - Fuselage
>
>
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|