Today's Message Index:
----------------------
1. 05:35 PM - Re: RV8-List Digest: 8 Msgs - 07/16/05 (William Archer)
Message 1
| INDEX | Back to Main INDEX |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: RV8-List Digest: 8 Msgs - 07/16/05 |
--> RV8-List message posted by: William Archer <flyawaboy@cox.net>
I am looking for a movable stand for my QB wings. Does anyone have one
that they don't need anymore. I would be glad to pay you for it and
come and get it. Bill Archer flyawaboy@cox.net 480-610-1186
On Jul 16, 2005, at 11:57 PM, RV8-List Digest Server wrote:
> *
>
> ==================================================
> Online Versions of Today's List Digest Archive
> ==================================================
>
> Today's complete RV8-List Digest can also be found in either of the
> two Web Links listed below. The .html file includes the Digest
> formatted
> in HTML for viewing with a web browser and features Hyperlinked Indexes
> and Message Navigation. The .txt file includes the plain ASCII version
> of the RV8-List Digest and can be viewed with a generic text editor
> such as Notepad or with a web browser.
>
> HTML Version:
>
>
> http://www.matronics.com/digest/rv8-list/Digest.RV8-List.2005-07
> -16.html
>
> Text Version:
>
>
> http://www.matronics.com/digest/rv8-list/Digest.RV8-List.2005-07
> -16.txt
>
>
> ================================================
> EMail Version of Today's List Digest Archive
> ================================================
>
>
> RV8-List Digest Archive
> ---
> Total Messages Posted Sat 07/16/05: 8
>
>
> Today's Message Index:
> ----------------------
>
> 1. 06:28 AM - Re: Closing tail dragger RV8 gear boxes. (Bryan
> Jones)
> 2. 08:50 AM - Re: RV8-List Digest: 3 Msgs - 07/15/05
> (dschares@yousq.net)
> 3. 03:27 PM - A GUIDE TO AIRCRAFT PAINTING & CORROSION CONTROL
> (Garey Wittich)
> 4. 03:59 PM - Re: Closing tail dragger RV8 gear boxes. (jordan)
> 5. 06:07 PM - Re: Closing tail dragger RV8 gear boxes. (Paul
> Schattauer)
> 6. 06:29 PM - PSS AOA Flap Position Sensor (Ed OConnor)
> 7. 08:15 PM - Re: PSS AOA Flap Position Sensor (Larry Bowen)
> 8. 08:16 PM - Re: PSS AOA Flap Position Sensor (Terry Watson)
>
>
> ________________________________ Message 1
> _____________________________________
>
>
> Time: 06:28:53 AM PST US
> From: "Bryan Jones" <rv_8pilot@hotmail.com>
> Subject: RE: RV8-List: Closing tail dragger RV8 gear boxes.
>
> --> RV8-List message posted by: "Bryan Jones" <rv_8pilot@hotmail.com>
>
> The -8 is a pretty solid design, but even so there are still area that
> can
> be improved upon. Regarding the gear towers, Mike Stewart has come up
> with
> a pretty workable modification for gear tower access. He's installed
> removable inside covers to the tower. Check here...
>
> http://www2.mstewart.net:8080/super8/geartower/index.htm
>
> Bryan Jones
> www.LoneStarSquadron.com
> Houston
>
>> From: "Sally and George" <aeronut58@hotmail.com>
>> Reply-To: rv8-list@matronics.com
>> To: rv8-list@matronics.com
>> Subject: RE: RV8-List: Closing tail dragger RV8 gear boxes.
>> Date: Fri, 15 Jul 2005 21:59:25 -0500
>>
>> --> RV8-List message posted by: "Sally and George"
>> <aeronut58@hotmail.com>
>>
>> Michele:
>>
>> You're right...it'll be a recurring nuisance getting inside those gear
>> boxes
>> to, for instance, tighten the nuts holding the landing gear in place,
>> or to
>> install the vent tubes and fittings.
>>
>> However, I don't think that the screws will work. You'll soon be
>> bolting
>> some weldments to the bottom of those gear boxes which will make
>> removal of
>> the cover impossible.
>>
>> High points to you for thinking ahead, but I think we just have to
>> live
>> with
>> these things.
>>
>> George Kilishek
>> RV 8 N888GK flying
>> RV 8 N57GK finishing kit
>>
>>> From: owner-rv8-list-server@matronics.com
>>> Reply-To: rv8-list@matronics.com
>>> To: <rv-list@matronics.com>, <rv8-list@matronics.com>,
>>> <RV-8@yahoogroups.com>
>>> Subject: RV8-List: Closing tail dragger RV8 gear boxes.
>>> Date: Fri, 15 Jul 2005 06:25:05 +0200
>>>
>>> --> RV8-List message posted by:
>>>
>>> Guys =96 I am currently building the RV8 tail dragger gear boxes.
>>> Closing
>>> the
>>> gear box, i.e. attaching the cover (802C) onto the sides (802 A & B),
>> calls
>>> for AN470 rivets. Once closed, getting inside the gear box is sort of
>> hard.
>>> Any of you guys have experience with replacing the rivets with
>>> screws (#6
>>> screws should do it) so that the cover could be removable?
>>>
>>>
>>> Tha
>>> Michele Delsol
>>>
>>> RV8 - Fuselage
>>>
>>>
>>
>>
>
>
> ________________________________ Message 2
> _____________________________________
>
>
> Time: 08:50:19 AM PST US
> From: "dschares@yousq.net" <dschares@yousq.net>
> Subject: RV8-List: RE: RV8-List Digest: 3 Msgs - 07/15/05
> 0.25 ADVANCE_FEE_1 Appears to be advance fee fraud
> (Nigerian 419)
>
> --> RV8-List message posted by: "dschares@yousq.net"
> <dschares@yousq.net>
>
>
> Gerneral question to all?
> Anyone using the mountian air lite instrument and how do you like it?
> Original Message:
> -----------------
> From: RV8-List Digest Server rv8-list-digest@matronics.com
> Subject: RV8-List Digest: 3 Msgs - 07/15/05
>
>
> *
>
> ==================================================
> Online Versions of Today's List Digest Archive
> ==================================================
>
> Today's complete RV8-List Digest can also be found in either of the
> two Web Links listed below. The .html file includes the Digest
> formatted
> in HTML for viewing with a web browser and features Hyperlinked Indexes
> and Message Navigation. The .txt file includes the plain ASCII version
> of the RV8-List Digest and can be viewed with a generic text editor
> such as Notepad or with a web browser.
>
> HTML Version:
>
>
> http://www.matronics.com/digest/rv8-list/Digest.RV8-List.2005-07
> -15.html
>
> Text Version:
>
>
> http://www.matronics.com/digest/rv8-list/Digest.RV8-List.2005-07
> -15.txt
>
>
> ================================================
> EMail Version of Today's List Digest Archive
> ================================================
>
>
> RV8-List Digest Archive
> ---
> Total Messages Posted Fri 07/15/05: 3
>
>
> Today's Message Index:
> ----------------------
>
> 1. 10:23 AM - Re: Closing tail dragger RV8 gear boxes. (Bob C.)
> 2. 06:12 PM - Electrical Tools-Wiring Supplies-Harnesses and More
> ()
> 3. 08:00 PM - Re: Closing tail dragger RV8 gear boxes. (Sally and
> George)
>
>
> ________________________________ Message 1
> _____________________________________
>
>
> Time: 10:23:57 AM PST US
> From: "Bob C. " <flyboy.bob@gmail.com>
> Subject: Re: RV8-List: Closing tail dragger RV8 gear boxes.
>
> --> RV8-List message posted by: "Bob C. " <flyboy.bob@gmail.com>
>
> Michele,
> I've left mine partially open and intend to close them with the
> appropriate
> cherry-max rivets when I'm done in there . . . soon I hope!
> Good Luck,
> Bob
>
> On 7/14/05, owner-rv8-list-server@matronics.com <
> owner-rv8-list-server@matronics.com> wrote:
>>
>> --> RV8-List message posted by:
>>
>> Guys 96 I am currently building the RV8 tail dragger gear boxes.
>> Closing
>> the
>> gear box, i.e. attaching the cover (802C) onto the sides (802 A & B),
>> calls
>> for AN470 rivets. Once closed, getting inside the gear box is sort of
>> hard.
>> Any of you guys have experience with replacing the rivets with screws
>> (#6
>> screws should do it) so that the cover could be removable?
>>
>>
>> Thanks,
>>
>> Michele Delsol
>>
>> RV8 - Fuselage
>>
>>
>
>
> ________________________________ Message 2
> _____________________________________
>
>
> Time: 06:12:45 PM PST US
> From: <fablef@bellsouth.net>
> Subject: RV8-List: Electrical Tools-Wiring Supplies-Harnesses and More
>
> --> RV8-List message posted by: <fablef@bellsouth.net>
>
> Hi Everyone,
>
>
> With Matt Dralle's permission, I wanted to let everyone on the list
> know
> that Affordable
> Panels has added electrical tools, electrical supplies, wiring
> harnesses
> and more to our inventory. We have some of the lowest prices on
> everything
> from tools, terminals, connectors, wire, electroluminescent lighting,
> etc.
>
>
> Our wiring harnesses for all Trutrak Autopilots are available in
> "Standard"
> and
> "Wing Root Disconnect" form, and we also offer harnesses for the Dynon
> EFIS,
> Flightcom and many others at the very best prices.
>
>
> Our full page catalog will be out in a couple of weeks. In the mean
> time,
> anyone
> interested can download the electrical portion of our catalog here.
>
>
> http://www.affordablepanels.com/electrical.htm
>
>
> All electrical orders placed on-line or faxed with a total above
> $175.00
> will ship
> free via UPS GROUND.
>
>
> Best Regards,
>
>
> Fabian Lefler
>
> www.affordablepanels.com
>
>
> ________________________________ Message 3
> _____________________________________
>
>
> Time: 08:00:06 PM PST US
> From: "Sally and George" <aeronut58@hotmail.com>
> Subject: RE: RV8-List: Closing tail dragger RV8 gear boxes.
>
> --> RV8-List message posted by: "Sally and George"
> <aeronut58@hotmail.com>
>
> Michele:
>
> You're right...it'll be a recurring nuisance getting inside those gear
> boxes
> to, for instance, tighten the nuts holding the landing gear in place,
> or to
> install the vent tubes and fittings.
>
> However, I don't think that the screws will work. You'll soon be
> bolting
> some weldments to the bottom of those gear boxes which will make
> removal of
> the cover impossible.
>
> High points to you for thinking ahead, but I think we just have to live
> with
> these things.
>
> George Kilishek
> RV 8 N888GK flying
> RV 8 N57GK finishing kit
>
>> From: owner-rv8-list-server@matronics.com
>> Reply-To: rv8-list@matronics.com
>> To: <rv-list@matronics.com>, <rv8-list@matronics.com>,
>> <RV-8@yahoogroups.com>
>> Subject: RV8-List: Closing tail dragger RV8 gear boxes.
>> Date: Fri, 15 Jul 2005 06:25:05 +0200
>>
>> --> RV8-List message posted by:
>>
>> Guys =96 I am currently building the RV8 tail dragger gear boxes.
>> Closing
>> the
>> gear box, i.e. attaching the cover (802C) onto the sides (802 A & B),
>> calls
>> for AN470 rivets. Once closed, getting inside the gear box is sort of
>> hard.
>> Any of you guys have experience with replacing the rivets with screws
>> (#6
>> screws should do it) so that the cover could be removable?
>>
>>
>> Tha
>> Michele Delsol
>>
>> RV8 - Fuselage
>>
>>
>
>
> ________________________________ Message 3
> _____________________________________
>
>
> Time: 03:27:32 PM PST US
> From: Garey Wittich <gareywittich2000@yahoo.com>
> Subject: RV8-List: A GUIDE TO AIRCRAFT PAINTING & CORROSION CONTROL
>
> --> RV8-List message posted by: Garey Wittich
> <gareywittich2000@yahoo.com>
>
>> This Information comes from my own research which I
> did for
>> my RV-8A, which I am building. Information applies
> to both Aluminum and Composite aircraft. This is the
> 3th printing.
>>
>> --------------- ------------- ------------
>>
>> SAVE YOURSELF hundreds of hours of research time and
>> building time, by using the comprehensive
>>
>> "Guide to Painting & Corrosion Control of Aluminum
>> and
>> Composite Aircraft"
>>
>> This book took over 600+ hours of research time by
>> me,
>> a fussy RV-8A Builder. Contains 69 pages of the
>> latest, practical information - summarized and
>> gathered from MIL Standards, Paint Shops, Builders
>> like you (what worked or didn't), Airframe Mfgs,
>> etc.
>> Covers products from PP&G, Dupont, Sherwin W'ms,
>> Sterling, Poly Fiber, Deft, Randolph Paints, PRC De
>> Soto, US Paints, Aircraft Finishing Systems, 3M,
>> etc.
>>
>> Some of the Topics covered in the 30 Sections are:
>> * Aircraft Paints vs Auto Paints and Other
>> Considerations
>> * Corrosion Control
>> * Spray Guns - selecting, adjusting, using
>> and painting problems
>> * Brushes / Rollers used with Primers &
>> Paints
>> * Prep Methods for Painting - Fiberglass,
>> Steel and Aluminum
>> * Epoxy Primers for Aluminum - MIL &
>> Commercial, Solvent & Water Reducible
>> * Primers for Fiberglass & Steel
>> * Wash Primers & Self Etching Primers
>> * Other Primers - Zinc Chromate,Zinc Oxide,
>> Enamel
>> * Paint Types: MIL & Non MIL Polyurethanes
>> Enamel Types
>> Acrylics - Lacquers & Enamels
>> * Acid Etch / Conversion Coatings (Alodine)
>> * Selecting a Paint Shop
>> * 3M Cleaning Pads, Liquid Cleaner
>> compatibility
>> * Paint Booths and their Construction
>> * References - MIL Standards & Tech Orders
>> * Directory of Aircraft Paint Mfgs, Distrib-
>> utors, etc. E-Mail addresses, phone
>> numbers, Application Notes
>>
>> YOUR AIRPLANE is judged by it's Paint Job and it is
>> costly too, so have the latest "Information" in
>> order
>> to make good decisions. Contains plenty of "Do's"
>> and
>> "Don'ts" that save you time, money and frustration.
>>
>> Send a check for $26 to (includes Postage within the
>> US) to:
>> Garey Wittich RV-8A Builder
>> 58 Village Parkway
>> Santa Monica, CA. 90405
>>
>>
>
>
> __________________________________
> http://mobile.yahoo.com/learn/mail
>
>
> ________________________________ Message 4
> _____________________________________
>
>
> Time: 03:59:20 PM PST US
> From: "jordan" <cjordan@telus.net>
> Subject: RE: RV8-List: Closing tail dragger RV8 gear boxes.
>
> --> RV8-List message posted by: "jordan" <cjordan@telus.net>
>
> What has been done , with Van's blessing I think, is to cut the
> inboard panels
> into three .Using nut plates for the center section and following the
> plans for
> the other two.The cuts would be made one at the top of the weldment
> and the
> second cut approximately the same distance from the top down.
>
> Colin in Kelowna.
> 8 finishing.
>
>
> ________________________________ Message 5
> _____________________________________
>
>
> Time: 06:07:45 PM PST US
> From: "Paul Schattauer" <chasm711@msn.com>
> Subject: RE: RV8-List: Closing tail dragger RV8 gear boxes.
>
> --> RV8-List message posted by: "Paul Schattauer" <chasm711@msn.com>
>
>
> If you start the access cover just below the bottom lightening hole it
> will
> not interfere with the steel plate.
>
> Paul Schattauer
>
>> From: "Sally and George" <aeronut58@hotmail.com>
>> Reply-To: rv8-list@matronics.com
>> To: rv8-list@matronics.com
>> Subject: RE: RV8-List: Closing tail dragger RV8 gear boxes.
>> Date: Fri, 15 Jul 2005 21:59:25 -0500
>>
>> --> RV8-List message posted by: "Sally and George"
>> <aeronut58@hotmail.com>
>>
>> Michele:
>>
>> You're right...it'll be a recurring nuisance getting inside those gear
>> boxes
>> to, for instance, tighten the nuts holding the landing gear in place,
>> or to
>> install the vent tubes and fittings.
>>
>> However, I don't think that the screws will work. You'll soon be
>> bolting
>> some weldments to the bottom of those gear boxes which will make
>> removal of
>> the cover impossible.
>>
>> High points to you for thinking ahead, but I think we just have to
>> live
>> with
>> these things.
>>
>> George Kilishek
>> RV 8 N888GK flying
>> RV 8 N57GK finishing kit
>>
>>> From: owner-rv8-list-server@matronics.com
>>> Reply-To: rv8-list@matronics.com
>>> To: <rv-list@matronics.com>, <rv8-list@matronics.com>,
>>> <RV-8@yahoogroups.com>
>>> Subject: RV8-List: Closing tail dragger RV8 gear boxes.
>>> Date: Fri, 15 Jul 2005 06:25:05 +0200
>>>
>>> --> RV8-List message posted by:
>>>
>>> Guys =96 I am currently building the RV8 tail dragger gear boxes.
>>> Closing
>>> the
>>> gear box, i.e. attaching the cover (802C) onto the sides (802 A & B),
>> calls
>>> for AN470 rivets. Once closed, getting inside the gear box is sort of
>> hard.
>>> Any of you guys have experience with replacing the rivets with
>>> screws (#6
>>> screws should do it) so that the cover could be removable?
>>>
>>>
>>> Tha
>>> Michele Delsol
>>>
>>> RV8 - Fuselage
>>>
>>>
>>
>>
>
>
> ________________________________ Message 6
> _____________________________________
>
>
> Time: 06:29:01 PM PST US
> RV-8 list RV List <rv8-list@matronics.com>
> From: Ed OConnor <Edwardoconnor@mac.com>
> Subject: RV8-List: PSS AOA Flap Position Sensor
>
> --> RV8-List message posted by: Ed OConnor <Edwardoconnor@mac.com>
>
> Does anyone on the list happen to have a picture of the installation of
> the PSS flap position sensor switch on an RV-8. I have been pondering
> just how to mount this little micro switch somewhere on the flap
> actuator bar. If no pictures, maybe a good description will do it.
> RV-8/Sandy Creek Airpark/Panama City FL/Mounting wings and tail
> feathers
>
>
> ________________________________ Message 7
> _____________________________________
>
>
> Time: 08:15:09 PM PST US
> From: "Larry Bowen" <Larry@bowenaero.com>
> Subject: RE: RV8-List: PSS AOA Flap Position Sensor
>
> --> RV8-List message posted by: "Larry Bowen" <Larry@BowenAero.com>
>
> This set-up has not given my any problems so far:
>
> http://bowenaero.com/mt3/archives/2003/10/flap_limit_swit.html
>
> -
> Larry Bowen, RV-8, 104 Hrs.
> Larry@BowenAero.com
> http://BowenAero.com
>
>
>> -----Original Message-----
>> From: owner-rv8-list-server@matronics.com
>> [mailto:owner-rv8-list-server@matronics.com] On Behalf Of Ed OConnor
>> Sent: Saturday, July 16, 2005 9:29 PM
>> To: RV-List RV List; RV-8 list RV List
>> Subject: RV8-List: PSS AOA Flap Position Sensor
>>
>> --> RV8-List message posted by: Ed OConnor <Edwardoconnor@mac.com>
>>
>> Does anyone on the list happen to have a picture of the
>> installation of the PSS flap position sensor switch on an
>> RV-8. I have been pondering just how to mount this little
>> micro switch somewhere on the flap actuator bar. If no
>> pictures, maybe a good description will do it.
>> RV-8/Sandy Creek Airpark/Panama City FL/Mounting wings and
>> tail feathers
>
>
> ________________________________ Message 8
> _____________________________________
>
>
> Time: 08:16:38 PM PST US
> From: "Terry Watson" <terry@tcwatson.com>
> Subject: RE: RV8-List: PSS AOA Flap Position Sensor
>
> --> RV8-List message posted by: "Terry Watson" <terry@tcwatson.com>
>
> Ed,
>
> Larry Bowen does. Here's a link:
> http://bowenaero.com/mt3/archives/2003/10/flap_limit_swit.html
>
> Terry
>
>
> Does anyone on the list happen to have a picture of the installation of
> the PSS flap position sensor switch on an RV-8. I have been pondering
> just how to mount this little micro switch somewhere on the flap
> actuator bar. If no pictures, maybe a good description will do it.
> RV-8/Sandy Creek Airpark/Panama City FL/Mounting wings and tail
> feathers
>
>
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|