---------------------------------------------------------- RV8-List Digest Archive --- Total Messages Posted Sun 07/02/06: 4 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 04:56 AM - rear seat throttle (michael christmann) 2. 07:54 AM - Re: rear seat throttle (Larry Bowen) 3. 10:08 AM - Re: rear seat throttle (rveighta) 4. 08:23 PM - Re: rear seat throttle (DONKEYVET@aol.com) ________________________________ Message 1 _____________________________________ Time: 04:56:48 AM PST US From: "michael christmann" Subject: RV8-List: rear seat throttle --> RV8-List message posted by: "michael christmann" I would like to install a throttle in the rear cockpit. I understand that Vans has a drawing and looked at Spruce's throttle offers. Any experience with this installation? Michael Christmann ________________________________ Message 2 _____________________________________ Time: 07:54:12 AM PST US From: "Larry Bowen" Subject: Re: RV8-List: rear seat throttle --> RV8-List message posted by: "Larry Bowen" I have Van's rear throttle kit. I did the lever a little different -- shorter and no bend. No probs and no regrets. -- Larry Bowen Larry@BowenAero.com http://BowenAero.com michael christmann wrote: > --> RV8-List message posted by: "michael christmann" > > > I would like to install a throttle in the rear cockpit. I understand that > Vans has a drawing and looked at Spruce's throttle offers. > Any experience with this installation? > Michael Christmann > > ________________________________ Message 3 _____________________________________ Time: 10:08:21 AM PST US From: rveighta Subject: Re: RV8-List: rear seat throttle --> RV8-List message posted by: rveighta Michael, I installed Van's rear seat throttle in my 8A, but modified it due to passengers hitting the throttle with their legs (unmodified it goes up then is bent inboard). Since I had the deluxe front throttle quadrant, which has a throttle like a P-51 mustang, ie, the lever has in essence a piece of horizontal pipe bolted to the throttle lever, I just duplicated the same thing in the back, using a smaller diameter piece of tubing bolted to a shortened shaft. It looks great and doesn't stick out where the passenger's leg can disturb it. Just my 2 cents FWIW. Walt Shipley Rv-8A 200+ hours, RV-8 under construction -----Original Message----- >From: michael christmann >Sent: Jul 2, 2006 7:51 AM >To: rv8-list@matronics.com >Subject: RV8-List: rear seat throttle > >--> RV8-List message posted by: "michael christmann" > >I would like to install a throttle in the rear cockpit. I understand that >Vans has a drawing and looked at Spruce's throttle offers. >Any experience with this installation? >Michael Christmann > > > > > > > ________________________________ Message 4 _____________________________________ Time: 08:23:37 PM PST US From: DONKEYVET@aol.com Subject: Re: RV8-List: rear seat throttle Michael, Me Three! I also installed a Van's rear seat throttle. I like it but like the others found it hit the rear seat occupant's left knee and considered it a safety issue so I cut it off at the bend. That works fine. I think I could have flown a year earlier without all of the little marginally useful extras I just had to have at the time and wonder if it was all worth it. A basic stock RV-8 would be 98% as cool as a decked out one. It would be lighter, fly earlier, and be a lot cheaper! Dennis Flosi