Today's Message Index:
----------------------
1. 09:50 AM - Re: RV8-List Longreron (rv8builder287)
2. 11:07 AM - Re: Re: RV8-List Longreron (japhillipsga@aol.com)
Message 1
| INDEX | Back to Main INDEX |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: RV8-List Longreron |
The 125 you are seeing on Drawing 21 is the thickness of Longeron 287. The decimal
point is missing. It should show .125 which is 1/8 of an inch thick. The
length is 15 feet 2 inches which equates to 182 inches.
Bill of Ann Arbor, Michigan
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=88905#88905
Message 2
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: RV8-List Longreron |
Bill, thanks for clearing that up. I had measured 182 inches on the jig, but I
just wasn't sure what I was seeing. Appreciate the help, best regards, Bill of
georgia
-----Original Message-----
From: mrwrj@comcast.net
Sent: Fri, 19 Jan 2007 12:49 PM
Subject: RV8-List: Re: RV8-List Longreron
The 125 you are seeing on Drawing 21 is the thickness of Longeron 287. The
decimal point is missing. It should show .125 which is 1/8 of an inch thick.
The length is 15 feet 2 inches which equates to 182 inches.
Bill of Ann Arbor, Michigan
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=88905#88905
________________________________________________________________________
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|