Today's Message Index:
----------------------
1. 01:11 PM - Re: Baffle fabric upper cowl and ramp intersection (Steve Struyk)
Message 1
INDEX | Back to Main INDEX |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: Baffle fabric upper cowl and ramp intersection |
Vince,
Send me (or post) your email address and I'll send some pictures off
list.
Steve Struyk
RV-8, 80 Hours
St. Charles, MO
----- Original Message -----
From: Vincent S. Himsl
To: rv8-list@matronics.com
Sent: Saturday, January 27, 2007 3:20 PM
Subject: RV8-List: Baffle fabric upper cowl and ramp intersection
I haven't a clue as to how to route the fabric near the intake for the
RV8 along the intersection of the upper cowl and the cowl ramp..
Specificially, does the fabric follow the curve of the ramp or do I
cut away a part of the ramp so that the fabric makes continuous contact
with the upper cowl.
The plans that come with the baffle kit from Van's are seriously
lacking in detail as regards how ALL the pieces come together in the
front on an RV8.
A picture of the side baffles complete would be great.
Thanks!
Vince H.
RV8 - SB Finish
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|