Today's Message Index:
----------------------
1. 05:50 PM - Re: RV8-List Vent Route (JAPhillipsGA@aol.com)
2. 07:15 PM - Re: Re: RV8-List Vent Route (Vincent S. Himsl)
Message 1
| INDEX | Back to Main INDEX |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: RV8-List Vent Route |
RV-8 Builder Friends, which wing rib lightening hole should I route the rear
pax air vent hose through ? The drawings don't specify which hole and my hose
will go through even the smallest rib hole. I can't tell from the fuselage
drawing if it makes a difference, but so far everything makes a difference if
it's wrong. Hope to hear from someone, Best regards, Bill of Georgia
**************************************
See what's free at http://www.aol.com.
Message 2
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: RV8-List Vent Route |
I am assuming you haven't built the fuselage yet.
The vent hole is @ 1 foot forward of the aft wing spar. You will be routing
the vent line through the second smallest hole.But!
You will probably mount the fuselage (pilot) vent first so I suggest you set
the vent tube aside until then as you don't know exactly the length you will
need.
Fact is, you will probably be well in to the finish kit before you return to
this. I have the engine installed, canopy done, etc. but my wings are still
hanging in the garage with the vent tube sticking out of the access ports
looking very dusty.
You will also want to install window screen material over the plastic
(excuse me.space age top quality composite) vents to keep out the critters.
Vince H. of Idaho
RV8 - VSB (very slow built) Finish
_____
From: owner-rv8-list-server@matronics.com
[mailto:owner-rv8-list-server@matronics.com] On Behalf Of
JAPhillipsGA@aol.com
Sent: Wednesday, March 28, 2007 5:49 PM
Subject: RV8-List: Re: RV8-List Vent Route
RV-8 Builder Friends, which wing rib lightening hole should I route the rear
pax air vent hose through ? The drawings don't specify which hole and my
hose will go through even the smallest rib hole. I can't tell from the
fuselage drawing if it makes a difference, but so far everything makes a
difference if it's wrong. Hope to hear from someone, Best regards, Bill of
Georgia
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|