---------------------------------------------------------- RV8-List Digest Archive --- Total Messages Posted Wed 05/23/07: 2 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 10:03 AM - Re: Re: RV8- Dimple Question (Heath Cherneski) 2. 06:21 PM - Re: Re: RV8- Dimple Question (dick martin) ________________________________ Message 1 _____________________________________ Time: 10:03:15 AM PST US From: "Heath Cherneski" Subject: Re: RV8-List: Re: RV8- Dimple Question Bill of Georgia, the idea is to follow the rivet plan (can't remeber the plans number) and only dimple those holes that call for a counter sunk rivet. the 470 rivets will be covered by the wing and do not need to be countersunk. i drove all rivets from the outside of the fuse, bucking on the inside. you might want to circle the group of holes that do not get dimpled ( i did as a reminder) so you don't have to spend time double, triple and qusdruple checking the plans. good luck and happy rivetting! Heath N818HC Enterprise, Alabama On 5/21/07, japhillipsga@aol.com wrote: > > Hello RV-8a builders, I am deburring and dimpling the fuselage. Am I > reading 28a (28) correct ? Are there five 470 rivets on each side that have > the working ends exposed on the bottom ? They are at bulkhead 804. Further, > does that mean that the remainder of the rivets along the bottom longrenforward of 804 have the working ends inside the cockpit ? Also, is there > something simple (paper, plan {other that Van's} written words, diagram, > etc.) that shows or explains precisely which holes are dimpled, their > directions and whether to counter sink or dimple ? Such a aid would really > be valuable. Hope to hear from someone before I screw up again , Best > regards, Bill of Georgia > > > -----Original Message----- > From: rv8-list@matronics.com > To: rv8-list-digest@matronics.com > Sent: Mon, 21 May 2007 2:57 AM > Subject: RV8-List Digest: 0 Msgs - 05/20/07 > > * > > ================================================= > Online Versions of Today's List Digest Archive > ================================================= > > Today's complete RV8-List Digest can also be found in either of the > two Web Links listed below. The .html file includes the Digest formatted > in HTML for viewing with a web browser and features Hyperlinked Indexes > and Message Navigation. The .txt file includes the plain ASCII version > of the RV8-List Digest and can be viewed with a generic text editor > such as Notepad or with a web browser. > HTML Version: > > http://www.matronics.com/digest/digestview.php?Style=82701&View=html&Chapter 07-05-20&Archive=RV8 > > Text Version: > > http://www.matronics.com/digest/digestview.php?Style=82701&View=txt&Chapter 07-05-20&Archive=RV8 > > > =============================================== > EMail Version of Today's List Digest Archive > =============================================== > > > ---------------------------------------------------------- > RV8-List Digest Archive > --- > Total Messages Posted Sun 05/20/07: 0 > ---------------------------------------------------------- > > > Today's Message Index: > ---------------------- > > > ------------------------------ > > * > > * > > ________________________________ Message 2 _____________________________________ Time: 06:21:49 PM PST US From: "dick martin" Subject: Re: RV8-List: Re: RV8- Dimple Question Bill 95% of the rivets in the RV airplanes require dimpling. The few that need countersinking will be obvious. Note: there are ok dimple dies and there are GOOD dimple dies. I had best luck with the spring back dies from Avery and Cleveland. Dick Martin RV8 N233M the fast one ----- Original Message ----- From: japhillipsga@aol.com To: rv8-list@matronics.com Sent: Monday, May 21, 2007 8:32 AM Subject: RV8-List: Re: RV8- Dimple Question Hello RV-8a builders, I am deburring and dimpling the fuselage. Am I reading 28a (28) correct ? Are there five 470 rivets on each side that have the working ends exposed on the bottom ? They are at bulkhead 804. Further, does that mean that the remainder of the rivets along the bottom longren forward of 804 have the working ends inside the cockpit ? Also, is there something simple (paper, plan {other that Van's} written words, diagram, etc.) that shows or explains precisely which holes are dimpled, their directions and whether to counter sink or dimple ? Such a aid would really be valuable. Hope to hear from someone before I screw up again , Best regards, Bill of Georgia -----Original Message----- From: rv8-list@matronics.com To: rv8-list-digest@matronics.com Sent: Mon, 21 May 2007 2:57 AM Subject: RV8-List Digest: 0 Msgs - 05/20/07 * Online Versions of Today's List Digest Archive Today's complete RV8-List Digest can also be found in either of the two Web Links listed below. The .html file includes the Digest formatted in HTML for viewing with a web browser and features Hyperlinked Indexes and Message Navigation. The .txt file includes the plain ASCII version of the RV8-List Digest and can be viewed with a generic text editor such as Notepad or with a web browser. HTML Version: http://www.matronics.com/digest/digestview.php?Style=82701&View=html& Chapter 07-05-20&Archive=RV8 Text Version: http://www.matronics.com/digest/digestview.php?Style=82701&View=txt&C hapter 07-05-20&Archive=RV8 ====================== EMail Version of Today's List Digest Archive ====================== ---------------------------------------------------------- RV8-List Digest Archive --- Total Messages Posted Sun 05/20/07: 0 ---------------------------------------------------------- Today's Message Index: ---------------------- ------------------------------------------------------------------------- ----- ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message rv8-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/RV8-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/rv8-list Browse Digests http://www.matronics.com/digest/rv8-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.