RV8-List Digest Archive

Mon 11/12/07


Total Messages Posted: 2



Today's Message Index:
----------------------
 
     1. 07:51 PM - Re: Re: RV8- Parking Brake Valve (Paul Trotter)
     2. 10:19 PM - Re: Re: RV8- Parking Brake Valve (Jeff Preou)
 
 
 


Message 1


  • INDEX
  • Back to Main INDEX
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 07:51:12 PM PST US
    From: Paul Trotter <ptrotter@acm.org>
    Subject: Re: RV8- Parking Brake Valve
    I planned to put my Matco parking brake valve in similar to Kevin's, but as Kevin mentioned, the direction of the control cable would be backwards if the cable came from the top as it would pretty much have to. Grove Aircraft just came out with a new parking brake valve similar to the Cleveland or Matco valve however the control arm can be clocked in 4 positions allowing you to get it so that you can pull the arm from the top to close it. I'm replacing my MAtco Valve with Grove's. Paul Trotter Jeff Preou wrote: > > Various people have done it. Ill be using the same method(-ish) as Kevin > > http://www.kilohotel.com/rv8/article.php?story=Parking_Brake_Valve > > -- > > Jeff Preou > > Hamilton, New Zealand > > *From:* owner-rv8-list-server@matronics.com > [mailto:owner-rv8-list-server@matronics.com] *On Behalf Of > *japhillipsga@aol.com > *Sent:* Friday, 9 November 2007 5:06 a.m. > *To:* rv8-list@matronics.com > *Subject:* RV8-List: Re: RV8- Parking Brake Valve > > > RV-8 & 8A builders, has anyone modified the brake system to include a parking brake valve? I put one in my 601XL and would not have a plane without one. Problem with the 8 I'm building is right > > > where the valve should be logically is split by the forward baggage compartment floor. Anybody > > > affixed it somewhere else ? Also, Van's is selling a parking valve. Looks to be the same one Spruce > > > lists at $ 109.00, somewhat less than Van. Hope to hear from you, Bill of Georgia > > > ------------------------------------------------------------------------ > This e-mail message has been scanned for Viruses and Content and > cleared by *NetIQ MailMarshal * > ------------------------------------------------------------------------ > * > > > *


    Message 2


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 10:19:23 PM PST US
    Subject: Re: RV8- Parking Brake Valve
    From: "Jeff Preou" <jeff@preou.com>
    Hey thanks for that Paul. I'll check that out and probably go that way too. Glad I didn't buy the Matco now... -- Jeff Preou Hamilton, New Zealand -----Original Message----- From: owner-rv8-list-server@matronics.com [mailto:owner-rv8-list-server@matronics.com] On Behalf Of Paul Trotter Sent: Tuesday, 13 November 2007 4:50 p.m. Subject: Re: RV8-List: Re: RV8- Parking Brake Valve I planned to put my Matco parking brake valve in similar to Kevin's, but as Kevin mentioned, the direction of the control cable would be backwards if the cable came from the top as it would pretty much have to. Grove Aircraft just came out with a new parking brake valve similar to the Cleveland or Matco valve however the control arm can be clocked in 4 positions allowing you to get it so that you can pull the arm from the top to close it. I'm replacing my MAtco Valve with Grove's. Paul Trotter Jeff Preou wrote: > > Various people have done it. I'll be using the same method(-ish) as Kevin... > > http://www.kilohotel.com/rv8/article.php?story=Parking_Brake_Valve > > -- > > Jeff Preou > > Hamilton, New Zealand > > *From:* owner-rv8-list-server@matronics.com > [mailto:owner-rv8-list-server@matronics.com] *On Behalf Of > *japhillipsga@aol.com > *Sent:* Friday, 9 November 2007 5:06 a.m. > *To:* rv8-list@matronics.com > *Subject:* RV8-List: Re: RV8- Parking Brake Valve > > > RV-8 & 8A builders, has anyone modified the brake system to include a parking brake valve? I put one in my 601XL and would not have a plane without one. Problem with the 8 I'm building is right > > > where the valve should be logically is split by the forward baggage compartment floor. Anybody > > > affixed it somewhere else ? Also, Van's is selling a parking valve. Looks to be the same one Spruce > > > lists at $ 109.00, somewhat less than Van. Hope to hear from you, Bill of Georgia > > ------------------------------------------------------------------------ > This e-mail message has been scanned for Viruses and Content and > cleared by *NetIQ MailMarshal * > ------------------------------------------------------------------------ > * > > > * ############################################################ This e-mail message has been scanned for Viruses and Content and cleared by NetIQ MailMarshal and Symantec Antivirus ############################################################




    Other Matronics Email List Services

  • Post A New Message
  •   rv8-list@matronics.com
  • UN/SUBSCRIBE
  •   http://www.matronics.com/subscription
  • List FAQ
  •   http://www.matronics.com/FAQ/RV8-List.htm
  • Web Forum Interface To Lists
  •   http://forums.matronics.com
  • Matronics List Wiki
  •   http://wiki.matronics.com
  • 7-Day List Browse
  •   http://www.matronics.com/browse/rv8-list
  • Browse RV8-List Digests
  •   http://www.matronics.com/digest/rv8-list
  • Browse Other Lists
  •   http://www.matronics.com/browse
  • Live Online Chat!
  •   http://www.matronics.com/chat
  • Archive Downloading
  •   http://www.matronics.com/archives
  • Photo Share
  •   http://www.matronics.com/photoshare
  • Other Email Lists
  •   http://www.matronics.com/emaillists
  • Contributions
  •   http://www.matronics.com/contribution

    These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.

    -- Please support this service by making your Contribution today! --