Today's Message Index:
----------------------
1. 11:56 PM - Gel Coated Fairings (Garey Wittich)
Message 1
INDEX | Back to Main INDEX |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Gel Coated Fairings |
Greetings:
Have an "older" Emphennage Kit (circa 1999) that came
with Gel Coated F.G. Fairings.
1) Do the "newer" Kits from Vans still come with the
Gel Coated Fairings ?
2) My understanding from reading the Archieves is
that the Gel Coat is used over Polyester Resin F.G.
parts and not over Epoxy Resin F.G. Parts. Is this
true ?
3) Is it worth buying from Vans the "newer" NON Gel
Coated Fairings (assuming they come that way now) than
trying to work with the existing Gel Coated fairings
that I have ?
4) What is the purpose of the Gel Coat - mold release
?
5) What Grit / Method used - would you recommend to
take off the Gel Coat (and not digging into the F.G.
weave) ?
6) Is it recommended to remove ALL the Gel Coat down
to the F.G. weave so that any "flexing" of the F.G.
fairing will not crack any final Top Coat of paint in
the future ? [My Fairing on the TOP of the VS will be
removable for access to the VOR Antenna - should that
be necessary and could flex during removal and crack
the Top Coat of paint.]
7) Any helpful HINTS on getting a nice Fairing / Skin
edge line where the Fairing meets the Skin and still
keeping the Fairing removable ? [Will be using #6
Screws into Nutplates riveted to the F.G. Fairing]
Appreciate your helpful inputs,
Garey Wittich Santa Monica, CA
Be a better friend, newshound, and
know-it-all with Yahoo! Mobile. Try it now. http://mobile.yahoo.com/;_ylt=Ahu06i62sR8HDtDypao8Wcj9tAcJ
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|