----------------------------------------------------------
                           RV8-List Digest Archive
                                      ---
                     Total Messages Posted Sat 03/29/08: 3
           ----------------------------------------------------------
 
 
Today's Message Index:
----------------------
 
     1. 06:25 AM - Re: Fuel Tank Nutplates  (Carl Bell)
     2. 04:55 PM - Two New Lists Added to the Matronics Lineup!  (Matt Dralle)
     3. 06:13 PM - Re: Fuel Tank Nutplates  (RAY SHEFFIELD)
 
 
 
________________________________  Message 1  _____________________________________


Time: 06:25:21 AM PST US
From: "Carl Bell" <carlbell@gforcecable.com>
Subject: RE: RV8-List: Fuel Tank Nutplates

Just carefully squeeze the rivets in the nutplates and you shouldn't have a
problem.  CJ

  _____  

From: owner-rv8-list-server@matronics.com
[mailto:owner-rv8-list-server@matronics.com] On Behalf Of
JAPhillipsGA@aol.com
Sent: Friday, March 28, 2008 11:22 PM
Subject: RV8-List: Fuel Tank Nutplates


Fellow RV Builders, I'm about to remove my wings for storage until painting,
but before I put them up I want to rivet in the nutplates that hold the root
farings on. Should these holes at the edge of the tanks be dimpled or
countersunk ? Seem like they are pretty close to the Proseal and I'd hate to
make a leak. What does everybody else do ? Thanks, Bill of Georgia 


**************
Create a Home Theater Like the Pros. Watch the video on AOL Home.
(http://home.aol.com/diy/home-improvement-eric-stromer?video=15&ncid=aolhom0
0030000000001) 


________________________________  Message 2  _____________________________________


Time: 04:55:37 PM PST US
From: Matt Dralle <dralle@matronics.com>
Subject: RV8-List: Two New Lists Added to the Matronics Lineup!


Dear Listers, 

I've added two new Email Lists to the Matronics List and Forum lineup today.  These
include the Rans-List and RV12-List.  Please surf over to the Matronics List
Subscription page and sign up for these new Lists if they are of interest
to you:

	http://www.matronics.com/subscribe

Full support on the Forums, List Browse, Archives, etc. is available.

Rans-List:

	http://www.matronics.com/Navigator?Rans-List

RV12-List

	http://www.matronics.com/Navigator?RV12-List

Best regards,

Matt Dralle 
Matronics Email List Administrator


________________________________  Message 3  _____________________________________


Time: 06:13:06 PM PST US
From: "RAY SHEFFIELD" <planecrazzy@wildblue.net>
Subject: Re: RV8-List: Fuel Tank Nutplates

Hi Carl,

Use #6 screws, 3/8 dia 3/32 dimple die, and #6 dimple die with flat on sides
to clear tank edges.  Pro seal doesn't harden completely ,so the dimpling
shouldn't
cause leaking.

ray

On Sat, Mar 29, 2008 at 9:23 AM, Carl Bell <carlbell@gforcecable.com> wrote:

>  Just carefully squeeze the rivets in the nutplates and you shouldn't have
> a problem.  CJ
>  ------------------------------
>
> *From:* owner-rv8-list-server@matronics.com [mailto:
> owner-rv8-list-server@matronics.com] *On Behalf Of *JAPhillipsGA@aol.com
> *Sent:* Friday, March 28, 2008 11:22 PM
> *To:* rv8-list@matronics.com
> *Subject:* RV8-List: Fuel Tank Nutplates
>
>
> Fellow RV Builders, I'm about to remove my wings for storage until
> painting, but before I put them up I want to rivet in the nutplates that
> hold the root farings on. Should these holes at the edge of the tanks be
> dimpled or countersunk ? Seem like they are pretty close to the Proseal and
> I'd hate to make a leak. What does everybody else do ? Thanks, Bill of
> Georgia
>
>
> **************
> Create a Home Theater Like the Pros. Watch the video on AOL Home.
> (
> http://home.aol.com/diy/home-improvement-eric-stromer?video=15&ncid=aolhom00030000000001)
>
>
> * *
>
> * *
>
> **
>
> **
>
> **
>
> **
>
> **
>
> **
>
> **
>
> *http://www.matronics.com/contribution*
>
> * *
>
> *
>
> *
>
>

 

-------------------------------------------------------------------------------------
                       Other Matronics Email List Services
-------------------------------------------------------------------------------------
Post A New Message               rv8-list@matronics.com
UN/SUBSCRIBE                     http://www.matronics.com/subscription
List FAQ                         http://www.matronics.com/FAQ/RV8-List.htm
Web Forum Interface To Lists     http://forums.matronics.com
Matronics List Wiki              http://wiki.matronics.com
Full Archive Search Engine       http://www.matronics.com/search
7-Day List Browse                http://www.matronics.com/browse/rv8-list
Browse Digests                   http://www.matronics.com/digest/rv8-list
Browse Other Lists               http://www.matronics.com/browse
Live Online Chat!                http://www.matronics.com/chat
Archive Downloading              http://www.matronics.com/archives
Photo Share                      http://www.matronics.com/photoshare
Other Email Lists                http://www.matronics.com/emaillists
Contributions                    http://www.matronics.com/contribution
-------------------------------------------------------------------------------------

These Email List Services are sponsored solely by Matronics and through the 
generous Contributions of its members.